The GW-7663 is designed for PROFINET IO device. It allows PROFINET controller to access Modbus TCP devices like PLC, sensor, I-8KE4-MCTP, and ET-7000 web based Ethernet I/O modules. We also provide a utility software for users to easily configure GW-7663. By using this module, users can integrate their Modbus devices into PROFINET network.
| Hardware |
|
| CPU |
32-bit CPU Core |
| RAM/Flash/EEPROM |
32 MB / 4 MB / 8 KB |
| Watchdog |
CPU built-in |
| ESD Protection |
4 kV class A |
| PROFINET Interface |
|
| Protocol |
PROFINET IO Device |
| Conformance Classes |
Class B |
| Services |
RTC, RTA, CL-RPC, DCP, LLDP, I&M |
| Cycle Time |
1 ms (min) |
| Ethernet Interface |
|
| Controller |
10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
| Connector |
RJ-45 x 2 (LED indicators) , Integrated 2-Port Switch |
| Services |
ICMP, IGMP, ARP, DHCP, TELNET, TFTP, SNMP, VLAN Priority Tagging |
| LED |
|
| Round LED |
AP LED, BOOT LED, ERR LED |
| Power |
|
| Power Supply |
Unregulated +10 ~ +30 VDC |
| Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption |
3.4 W |
| Mechansim |
|
| Installation |
DIN-Rail |
| Dimensions |
42 mm x 76 mm x 119 mm (W x L x H) |
| Environment |
|
| Operating Temperature |
-25°C ~ +75°C (-13°F ~ +167°F) |
| Storage Temperature |
-30°C ~ +80°C (-22°F ~ +176°F) |
| Humidity |
10 ~ 90% RH, non-condensing |
|
