|
|
856-14229 - ** DISCONTINUED ** iMcV-GigaFiberLinX-III,TX/SSLX-SM1550/LG-SC(1550xmt/1490rcv) by IMC
|
|
|
- Single wide module, allowing maximum use of slots in multi-port chassis
- 3 mode of Operation, to ease the use of installation
- SFP port model supports both copper and fiber SFPs
- Backwards compatible with the iMcV-Giga-FiberLinX-II
- Offers up to 64 VLANs
|
|
|
The iMcV-Giga-FiberLinX-III intelligent media converter connects a Host/Remote
Ethernet network over a fiber optic or CAT 5 copper connection. It combines
media conversion with an advanced-feature set for network management and
troubleshooting, including OAM (Operations, Administration and Maintenance),
Extra-Tagging and EtherType control functionality. With the
iMcV-Giga-FiberLinX-III, administrators can observe the end-points over the
fiber segment between them, as a single management entity. Bandwidth scalability
and support for MIBs II makes this modular device a versatile gigabit solution,
now available as a single wide module.
iMcV-Giga-FiberLinX-III allows for remote configuration and alerts
administrators to any potential problems on the long-haul fiber run, provides
vital information on link condition and reports data traffic statistics.. In
addition to the iMcV-Giga-FiberLinX-III's support for Host/Remote environments,
the product also has built-in support for the Unified Management Agent (UMA).
With UMA, the central location can manage all Host/Remote pairs installed in an
iMediaChassis with the single IP address of the chassis.
Optional single- or dual-SFP port versions or all copper (RJ-45) port versions
are also available for complete network flexibility. The iMcVGiga-- FiberLinX-III
SFP requires one or two MSA-compliant fiber optic SFP modules (sold separately)
to operate. [Copper SFPs are not supported.]
General
-
Preserves complete end-to-end fiber connection integrity
-
Supports Extra Tagging (Q-in-Q)
-
Supports 802.3ah OAM (Operation, Administration & Management)
-
Bi-directional bandwidth control
-
Read/write IEEE 802.1Q VLAN-tags
-
QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8
levels of priority)
-
Layer 2 packet switching, store and forward operation
-
Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps; 1,488,100
pps for 1000 Mbps
-
Features Auto Negotiation and Selective Advertising
-
Supports up to 64 VLANs operation
-
MTU: Supports over-sized (Jumbo) packets up to 10240 bytes
Security
-
Password Control
-
Multiple Access Levels: User Assigned Accounts & Access Levels
Management
-
SNMP V1 and V2c compatible
-
Includes GUI-based iView² software for remote management (WIN and WebServer
versions)
-
Monitors far-end (remote) status without a physical presence or separate
connection
-
IEEE 802.3x Flow Control
-
Includes DHCP and TFTP clients
-
Supports Telnet
-
Includes loopback test modes (MAC swap)
-
Includes Link Fault Pass Through
-
Supports Unified Management Agent (UMA)
-
Includes status LEDs
Ethernet Protocols Supported
-
IEEE 802.3ab 1000Base-T twisted pair
-
IEEE 802.3z 1000Base-X fiber
-
IEEE 802.3x Flow Control
-
IEEE 802.3i 10Base-T twisted pair
-
IEEE 802.3u 100Base-TX twisted pair
Mechanical
-
Dimensions Standard single-slot chassis module
-
Shipping Weight 0.3 lbs (0.136078 kg)
Power Consumption
Environmental
-
Operating Temperature: +32° to +122° F (0° to +50° C)
-
Storage Temperature: -13° to +158° F (-25° to +70° C)
-
Humidity: 5% - 95% (non-condensing)
Regulatory Aprovals
-
FCC Class A
-
UL/cUL, CSA, CE
|
|
|
|