|
• Camera
|
|
Sensor
|
1/2.7” HD progressive scan CMOS
|
|
Lens
|
Designed for C/CS mount lens (lens not included)
|
|
Auto Iris Type
|
DC drive
|
|
Illumination (low light sensitvity)
|
• Color: 0.2 lux at F1.2
• B/W: 0.05 lux at F1.2
|
|
White Balance
|
ATW/AWB (range: 3200 to 10000°K)
|
|
Dynamic Range
|
• Color: 100 dB
• B/W: 110 dB
|
|
Auto Electronic Shutter
|
1/30 to 1/25000 sec.
|
|
Electronic Shutter
|
Auto
|
|
S/N Ratio
|
50 dB (Gamma, Aperture, AGC OFF; DNR ON)
|
|
ICR Control
|
Auto (light sensor control) or DI control
|
|
DNR
|
Built-in DNR
|
|
WDR
|
Levels 1-8
|
|
AGC Control
|
2X, 4X, 8X, 16X, 32X, 64X
|
|
Flickerless Control
|
Indoor/Outdoor mode
|
|
Black Level Control
|
High/Medium/Low
|
|
Auto Exposure
|
Level ±5
|
|
Image Rotation
|
Flip, Mirror, and 180° rotation
|
|
Image Setting
|
Manual tuning with saturation, sharpness, and contrast
|
|
• Video
|
|
Video Compression
|
H.264 (ISO/IEC 14496-10) or MJPEG
|
|
Video Outputs
|
Ethernet
|
|
Video Streams
|
3 video streams (2 x H.264 and 1 x MJPEG)
|
|
Video Resolution and FPS (frames per
second)
|
|
|
NTSC
|
PAL
|
|
Size
|
Max.FPS
|
Size
|
Max.FPS
|
|
OCIF
|
176*112
|
30
|
176*144
|
25
|
|
QVGA
|
320*240
|
30
|
320*240
|
25
|
|
CIF
|
352*240
|
30
|
352*288
|
25
|
|
VGA
|
640*480
|
30
|
640*480
|
25
|
|
4CIF
|
704*480
|
30
|
704*576
|
25
|
|
Full D1
|
720*480
|
30
|
720*576
|
25
|
|
SVGA
|
800*600
|
30
|
800*600
|
25
|
|
HD
|
1280*720
|
30
|
1280*720
|
25
|
|
WXGA
|
1280*800
|
30
|
1280*800
|
25
|
|
|
Note
|
Mulitple streams may not support up to 30 FPS.
|
|
Video Viewing
|
• DynaStream™ supported for automatic adjustment of frame rate
• 3 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 5 simultaneous unicast connections
|
|
PTZ
|
Digital PTZ with 4X zoom
|
|
• Network
|
|
Protocols
|
TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP,
RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP,
802.1X, SSH/SSL
|
|
Ethernet
|
1 10/100BaseT(X) Ethernet port, RJ45 connector
|
|
• Serial Interface
|
|
RS-485
|
1 half-duplex RS-485
|
|
• GPIO
|
|
Digital Inputs
|
1, max. 8 mA
High: +13 to +30 V; Low: -30 to +3 V
|
|
Relay Output
|
1, max. 24 VDC @ 1 A
|
|
• LED Indicators
|
|
STAT
|
Indicates if the system is booted properly or not
|
|
Network
|
10 Mbps or 100 Mbps
|
|
Power
|
Power on/off
|
|
• Local Storage
|
|
SD Socket
|
Standard SD socket (SDHC)
|
|
• Power Requirements
|
|
Input
|
• Power consumption: 7.5 W
• Redundant power inputs
• 12/24 VDC, 24 VAC, or Power-over-Ethernet (IEEE 802.3af)
|
|
• Physical Characteristics
|
|
Camera Body Housing
|
Metal, IP30 protection
|
|
Dimensions
|
• Camera Body: 78 x 65 x 150 mm
• Outdoor Housing: 134 (diam.) x 318 (L) mm
• Wallmounting Bracket: 205 mm (L)
|
|
Weight
|
670 g
|
|
Installation
|
Wall mounting, pole mounting, corner mounting
|
|
Note
|
Optional external housing and mounting accessories may be
required.
|
|
• Alarms
|
|
Intelligent Video
|
Camera tamper, virtual fence, alert zone, missing object,
unattended object
|
|
Note
|
IVA functions are optional except for camera tamper.
|
|
Video Motion Detection
|
3 independently configurable motion areas
|
|
Scheduling
|
Daily repeat timing schedule
|
|
Imaging
|
JPEG snapshots for pre/trigger/post alarm images
|
|
Video Recording
|
Event recordings stored on the SD card
|
|
Custom Alarms
|
HTTP event servers for setting customized alarm actions
|
|
Email/FTP Messaging
|
Automatic transfer of stored images via email or FTP as
event-triggered actions
|
|
Pre-alarm Buffer
|
24 MB video buffer for JPEG snapshot images
|
|
• Security
|
|
Password
|
User level password protection
|
|
Filtering
|
By IP address
|
|
Authentication
|
802.1X
|
|
Encryption
|
HTTPS, SSH
|
|
• Environmental Limits
|
|
Operating Temperature
|
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
|
|
Storage Temperature
|
-40 to 85°C (-40 to 185°F)
|
|
Ambient Relative Humidity
|
5 to 95% (non-condensing)
|
|
• Standards and Certifications
|
|
Safety
|
UL 60950-1
|
|
Hazardous Location
|
UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nCnAnL IIC T4
|
|
Note
|
The VP-3113MPIR lens is Class I Div. 2 and ATEX Zone 2
certified.
|
|
EMI
|
FCC Part 15, CISPR (EN 55022) Class A
|
|
EMS
|
EN 61000-4-2 (ESD), Level 3,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
|
|
Shock
|
IEC 60068-2-27
|
|
Freefall
|
IEC 60068-2-32
|
|
Vibration
|
IEC 60068-2-6
|
|
Traffic Control
|
NEMA TS2
|
|
Rail Traffic
|
EN 50121-4
|
|
Note
|
Please check Moxa’s website for the most up-to-date
certification status.
|
|
• MTBF (mean time between failures)
|
|
Time
|
541,826 hours
|
|
Database
|
Telcordia (Bellcore), GB 25°C
|
|
• Warranty
|
|
Warranty Period
|
5 years
|
|
• Minimum Viewing System Requirements
|
|
CPU
|
Pentium 4, 2.4 GHz
|
|
Memory
|
512 MB of memory
|
|
OS
|
Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
|
|
Browser
|
Internet Explorer 9.x or above
|
|
Multimedia
|
DirectX 9.0c or above
|
|
• Software Development Kit
|
|
VPort SDK PLUS
|
Includes CGI commands, ActiveX Control, and API library for
customized applications or system integration for third-party developers
(latest version available on Moxa website).
|
|
Standard
|
ONVIF ProfileS
|
