| • Camera |
| Sensor |
1/3” progressive scan CMOS |
| Lens |
3X: f=3(wide) to 9 (tele) mm, F1.6 to F2.6
• Horizontal angle of view: 30.2° to 87.4°
• Vertical angle of view: 16.4° to 47°
• Diagonal angle of view: 32.4° to 95.7°
2X: f=10 (wide) to 23 (tele) mm, F1.2 to F2.3
• Horizontal angle of view: 11.4° to 26.9°
• Vertical angle of view: 6.3° to 14.4°
• Diagonal angle of view: 13.7° to 31° |
| Illumination (low light sensitvity) |
Color: 0.2 Lux @ F1.2
B/W: 0.1 Lux @ F1.2 |
| Day & Night |
Auto/Color/BW; ICR Control |
| Synchronization |
Internal |
| White Balance |
ATW/AWB |
| Electronic Shutter |
Auto, Fixed (1/30 to 1/25000 sec) |
| S/N Ratio |
50 dB (AGC, OFF; DNR ON) |
| ICR Control |
Auto (light sensor control) or DI control |
| DNR |
Built-in DNR (digital noise reduction) |
| WDR |
On/Off, up to 100 dB |
| AGC (auto gain control) |
2X, 4X, 8X, 16X |
| IRIS |
Auto, P-IRIS |
| Flickerless Control |
Automatic, 50 Hz,60 Hz modes |
| Auto Exposure |
Level ±5 |
| Image Rotation |
Flip, Mirror, 90°, 270° and 180° rotation |
| Image Setting |
Manual tuning with saturation, sharpness, and contrast |
| • Video |
| Video Compression |
H.264 (ISO/IEC 14496-10) or MJPEG |
| Video Output |
via Ethernet |
| Video Streams |
4, H.264, or MJPEG independent video streams |
| Video Resolution and FPS (frames per second) |
|
NTSC |
PAL |
|
Size |
Max. FPS |
Size |
Max. FPS |
CIF |
352 x 240 |
30 |
352 x 288 |
25 |
VGA |
640 x 480 |
30 |
640 x 480 |
25 |
4CIF |
704 x 480 |
30 |
704 x 576 |
25 |
Full D1 |
720 x 480 |
30 |
720 x 576 |
25 |
SVGA |
800 x 600 |
30 |
800 x 600 |
25 |
HD |
1280 x 720 |
30 |
1280 x 720 |
25 |
SXGA |
1280 x 1024 |
30 |
1280 x 1024 |
25 |
Full HD |
1920 x 1080 |
30 |
1920 x 1080 |
25 |
|
| Video Viewing |
• DynaStream™ support for changing the video frame rate automatically
• CBR Pro™ support for accurate streaming bit rate control
• 3 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 5 simultaneous unicast connections, 50 multicast clients |
| • Audio |
| Audio Inputs |
1, 3.5 mm phone jack |
| Audio Outputs |
1, 3.5 mm phone jack |
| Audio Format |
Mono, PCM (G.711); AAC |
| • Network |
| Protocols |
IPv4/v6,TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, TFTP, UPnP, RTP, RTSP, ICMP, IGMPv3, ARP, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS, OPT66/67 |
| Ethernet |
1 10/100BaseT(X) Ethernet port, RJ45 connector |
| • Serial Port |
| PTZ Ports |
1, RS-485, terminal block connector |
| PTZ Driver |
Pelco D, Pelco P, custom camera |
| • Local Storage |
| SD Socket |
Standard SD socket (SDXC, SDHC) |
| • GPIO |
| Digital Inputs |
1, max. 8 mA,• High: +13 V to +30 V
• Low: -30 V to +3 V |
| Relay Outputs |
1, max. 24 VDC @ 1 A |
| • LED Indicators |
| STAT |
Indicates if the system is booted properly or not |
| Network |
10 Mbps or 100 Mbps |
| Power |
Power on/off |
| • Power Requirements |
| Input Voltage |
12/24 VDC, 24 VAC or Power-over-Ethernet redundant power design |
| Input Current |
12/24 VDC, min. 0.91/ 0.38 A; 24 VAC, min. 0.8 A; PoE 48 VDC, min. 0.24A |
| • Physical Characteristics |
| Housing |
Metal, IP30 protection |
| Dimensions |
200 x 90 x 70 mm ( 7.9 x 3.5 x 2.8 in) |
| Installation |
Wall mounting, pole mounting, corner mounting |
| Weight |
1.2 kg (2.65 lb) |
| Note |
Optional external housing and mounting accessories may be required. |
| • Alarms |
| Intelligent Video |
Camera tamper |
| Video Motion Detection |
3 independently configurable motion areas |
| Scheduling |
Daily repeat timing schedule |
| Imaging |
JPEG snapshots for pre/trigger/post alarm images |
| Video Recording |
Event/always recordings stored on the SD card |
| Custom Alarms |
HTTP event servers for setting customized alarm actions |
| Email/FTP Messaging |
Automatic transfer of stored images via email or FTP as event-triggered actions |
| Pre-alarm Buffer |
50 MB video buffer for JPEG snapshot images |
| • Security |
| Password |
User level password protection |
| Filtering |
By IP address |
| Authentication |
802.1X |
| Encryption |
HTTPS, SSH |
| • Environmental Limits |
| Operating Temperature |
Standard model: -25 to 60°C (-13 to 140°F)
Wide Temp. model: -40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| Vibration |
IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g;
1.50 hrs/axis
IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g;
1.86 hrs/axis |
| Shock |
IEC 60068-2-27, 20g/11ms |
| Altitude |
2000 m |
| • Standards and Certifications |
| Safety |
UL 60950-1 |
| Rail Traffic |
EN 50121-4 |
| EMC |
EN 55032/24 |
| EMI |
CISPR 32, FCC Part 15B Class A |
| EMS |
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: Signal: 10 V
IEC 61000-4-8
IEC 61000-4-11 |
| Traffic Control |
NEMA TS2 |
| • Warranty |
| Warranty Period |
5 years (limited warranty on moving parts; see Moxa's online warranty policy for details) |
| Details |
See www.moxa.com/warranty |
| • Minimum Viewing System Requirements |
| CPU |
Intel Core i3 or above |
| Memory |
2 GB of memory |
| OS |
Windows 7 |
| Browser |
Internet Explorer 10 or above |
| Multimedia |
DirectX 11.0 or above |
| • Software Development |
| VPort SDK PLUS |
Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from Moxa’s website). |
| Standard |
ONVIF Profile S |
