SoftNVR-IA - 32-channel IP video surveillance software for industrial automation systems
by MOXA

Introduction

The SoftNVR-IA 64-channel IP surveillance software is designed for use with industrial applications. One of the key features of SoftNVR-IA is a built-in OPC server, which can communicate directly with industrial automation systems (SCADA, HMI, etc.). To enhance system intelligence, video recording and alarms can be triggered by events such as Digital Input and Video Loss that are supported by SoftNVR-IA, as well as events in automation systems. Most importantly, SoftNVR-IA gives industrial system integrators unlimited capability for integrating IP surveillance systems with automation systems.

OPC Communication 

• Can receive event tags sent from automation system to trigger video recording and other actions Can send event tags to the automation system with system informaiton and the status of each channel

•  

  Live View

  Supports 1, 4, 6, 9, 10, 13, 16, 25, 32, 64 live display Supports MJPEG, MPEG4, and H.264 video streams (only supports VPort models) Supports up to 64 channels in the camera list Easy-to-use with drag and drop video display selection Can provide snapshot images in JPEG format Supports image tuning, including brightness, saturation, contrast, and hue Supports 2-way audio for voice communication between field sites and the control center Supports dual monitor and full screen display Supports display screen rotation Supports the PTZ control panel defi ned in VPort products Supports i-frame (key frame) decode only, which lowers • displayed frame rate immediately to save system resources for other higher priority tasks

   

  Video Record

  Video recording can be triggered manually or by event Video files are in AVI format, and can be played back on all popular media players (requires SoftNVR-IA codec) The storage hard disk can be selected from network hard drives Supports the FIFO recycle function for long time video recording Can configure the number of days recorded video files will be stored Supports pre-event video recording for up to 30 seconds

   

  Playback & Search

  Can play back up to 4 recorded videos simultaneously Supports timeline selection when in video playback mode Supports stop, speed up, slow down, rewind frame-by-frame, and forward frame-by-frame Search video records by camera, time, or event Can take snapshot images when in video playback mode

   Schedule

  Can set up a weekday schedule Schedule settings can be based on camera and event

   
  Emap

  Can load BMP emap for easy camera location identification Maximum 32 emaps can be built in the list Video image can be pop out when targeting the cursor on the camera icon 3 types camera icon and maximum 8 lens direction can be selected Double click on the camera can open the camera’s live display video Camera icon can be configured in flash once an alarm event occurs

   

  Alarm Events

  Alarm events: Digital Input and Video Loss  Can accept events from the automation system via OPC communication Alarm triggered actions: popup display, go preset, play sound, trigger DO (relay).

  Remote Access 

  Remote live view via web access Remote playback of recorded video via web access Capable of searching a specified recorded video by event, time, and  camera Remote control of PTZ camera

  System 

  Automatically search or manually detect the IP address of a video device on the LAN Can configure the server name Can configure multiple email addresses for receiving alarm  messages Folder and file names of snapshot images can be customized Up to 4 groups and 32 users privileges for different operation  purpose  Supports English, Traditional Chinese, and Simplified Chinese