RM-22.22 - 2 Pole, 20A Step Relay for Direct 35 mm Rail by ICP DAS

RM-22.22 - 2 Pole, 20A Step Relay for Direct 35 mm Rail
by ICP DAS

2 Pole, 20A Step Relay for Direct 35mm Rail (EN 50022) Mounting

Description
Specification
Datasheet

2 Pole, 20A Step Relay for Direct 35mm Rail (EN 50022) Mounting

Double phase switch 2 NO (DPST-NO)
35 mm rail (EN 50022) mount
17.4mm wide
Test button

Contact Specification
Contact Configuration	2 NO (DPST-NO)
Rated Current / Maximum peak Current	20/30 A
Rated Voltage/Maximum Switching Voltage	250/400 V
Rated load in AC1	5000 VA
Rated load in AC15 (230V AC)	1000 VA
Single phase motor rating (230 V AC)	-
Breaking capacity DC1:30/110/220 V	10/0.3/0.12 mW(V / mA)
Minimum switching load	1000(10/10)
Standard contact material	AgSn02
Incandescent Nominal Rate Lamps (230V)	1000 W
Compensated Fluorescent Nominal Rate Lamps(230V)	360 W

Coil Specification
Nominal voltage (UN)	24 VDC
Rated DC power DC	1.25
Operating range	21.6-26.4 VDC
DC Version Data
Nominal Voltage	24
Coil Code	9.024
Operating Range	21.6 - 26.4
Resistance	460
Consumption I at UN	52.2

Technical Data
Mechanical life
Electrical life at rated load in AC1
Operate/release time	15/8 ms
Maximum impulse duration	continuous
Insulation between coil and contacts (1.2/50 μs) kV	4
Ambient temperature range	-40 ~ 40C
Protection category	IP20

Insulation & Dielectric Strength
Between Supply and Contacts	3500 VAC
Between Open Contacts	2000 VAC
Between Adjacent Contacts	2000 VAC

Other Data
Bounce Time: NO / NC	5 / 10 ms
Power loss to environment without contact current	1.2 W
Power loss to environment with rated current	5.2
Screw Torque	.08
Max Wire Size	Contact Terminals
	Solid Cable	Stranded Cable
	1 x 6 / 2 x 6	1 x 6 / x 2 4
	1 x 10 / 2 x 10	1 x 102 x 12
If the coil is operated for a prolonged period of time, adaquate ventilation of the relays must be provided - suggested gap of 9 mm between adjacent relays.

89 K

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.