PCI-7256
ADLINK's PCI-7256 is a 16-CH latching relay outputs and 16-CH isolated Digital Input PCI
card. All relays are Form C type, which are suitable for device connection with
ON/OFF control. With latching relays, the PCI-7256 has the advantage of power
saving. The status of each latching relay output is represented by an onboard
LED. When the relay is in SET condition, its corresponding LED will turn ON, and
on the contrary, it is OFF. Latching relays also features unchanged status even
when the system power is turned off, so that the PCI-7256 is suitable for
critical applications which need to keep output status when fault conditions
happen. All digital input channels are non-polarity, optically isolated, and may
be set to use RC filter or not. The PCI-7256 also features a change-of-state
(COS) function that generates an interrupt when any digital input changes its
state.
PCI-7256
Relay Output
- Number of channels: 16
- Relay type: Latching SPDT (Form C), latching
- The output status will keep unchanged when power-off
- Isolation voltage: 1500 VRMS
- Contact rating
- AC: 125 V @ 0.5 A
- DC: 30 V @ 1 A
- Breakdown voltage: 1000 VRMS
- Contact resistance: 60 mΩ
- Relay ON/OFF time
- Operate time: 3 ms
- Release time: 3 ms
- LED indicators
- Onboard LEDs for relay status
- Onboard connectors for external LED connection
- Expected relay life:
- >2x100000
operations @ 1 A, 30 VDC
- >100000
operations @ 0.5 A, 125 VAC
- Data transfer: programmed I/O
Isolated Digital Input
- Number of channels: 16
- Maximum input range: 24 V, non-polarity
- Digital logic levels
- 0-24 V, non-polarity
- Input high voltage: 10-24 V
- Input low voltage: 0-2 V
- Input resistance: 4.7 kΩ @ 0.5 W
- Isolation voltage: 2500 VRMS channel-to-system
- Interrupt sources: Change-of-state interrupt, digital input channel 0 and 1
- Data transfer: programmed I/O
Isolated Power Supply
- Output voltage: +5 V
- Output current: 170 mA max @ 40˚C
General Specifications
- I/O connector: 68-pin SCSI-II female
- Operating temperature: 0˚C to 60˚C (32˚F to 140˚F)
- Storage temperature: -20˚C to 80˚C (-4˚F to 176˚F)
- Relative humidity: 5% to 95%, non-condensing
- Power requirements
|
PCI-9256 |
PCIe-7256 |
|
+5V |
+3.3V |
+5V |
Typical |
340mA |
36.3mA |
141mA |
Max. |
980mA |
38.2mA |
464mA |
|