|
|
PCI-M512U - Univeral PCI Rentative Memory Board with 12 digital inputs and 16 digital outputs by ICP DAS
|
|
|
Universal PCI, 512K bytes Memory Board with 20 Digital Inputs and 16 Digital Outputs. Two Li-batteries allow for battery-backup of SRAM data
|
|
|
PCI-M512 has been replaced by PCI-M512U.
PCI-M512U provides 512K bytes memory, 12 digital input channels, and 16 output channels. PCI-M512U consists of one 12-bit input port and one 16-bit output port. DB-16P can be used to connect the input ports (CN2) for isolation purposes, or use DB-16R to interface to the output ports (CN1) for relay control. PCI-M512U PCI card supports both 5V and 3.3V. PCI-M512U (Universal PCI version) is fully compatible with the PCI-M512 (PCI version).
Users can use the DB-16P to connect the input ports (CN2) for isolation purpose, or use DB-16R to interface to the output ports (CN1) for relay control. The PCI-M512U equips two Li-batteries to maintain content in the event of PC power loss. The two Li-batteries can continue supplying power to 512KB SRAM to retain the important data for 10 years; and the two-battery design is safe to maintain the data when replacing new batteries.
The PCI-M512U also provides 4 LED indicators to display the battery states. It is easy to know the status of the two Li-batteries is normal, low voltage or fault by the 4 LED indicators. The PCI-M512U is an ideal solution for system reliability.
- On-board 512K bytes SRAM for PCI-M512/PCI-M512U
- Two Li-batteries, BT1 & BT2, for battery-backup the data of SRAM
- Two indicators, low-battery & bad-battery, for battery BT1
- Another two indicators, low-battery & bad-battery, for battery BT2
- 16-bit general purpose TTL-compatible D/O or relay (with daughter board DB-16R or DB-24PR)
- 12-bit general propose TTL-compatible D/I or isolated input (with daughter board DB-16P)
- Universal PCI card, supports both 5V and 3.3V PCI bus
- All inputs are TTL compatible
- Logic high voltage: 2.4V ( Min. )
- Logic low voltage: 0.8V ( Max. )
- All outputs are TTL compatible
- Sink current: 24mA ( Max. )
- Source current: 15mA ( Max. )
Digital Input |
Channels |
12 |
Compatibility |
5 V/TTL |
Input Voltage |
Logic 0: 0.8 V max.
Logic 1: 2.0 V min. |
Response Speed |
1.4 MHz(Typical) |
Digital Output |
Channels |
16 |
Compatibility |
5 V/TTL |
Output Voltage |
Logic 0: 0.4 V max.
Logic 1: 2.4 V min. |
Output Capability |
Sink: 2.4 mA @ 0.8 V
Source: 0.8 mA @ 2.0 V |
Response Speed |
1.4 MHz(Typical) |
Special |
SRAM Size |
512 KB |
Li-Battery |
BT1 & BT2 |
Battery Status bits |
BT1 Low, BT1 Bad, BT2 Low, BT2 Bad(low voltage=2.3 V, bad voltage=2.1 V) |
LED Indicators |
BT1 Low (Green), BT1 Bad (Red) BT2 Low (Green), BT2 Bad (Red) |
General |
Bus Type |
3.3 V / 5 V Universal PCI, 32-bit, 33 MHz |
Data Bus |
16-bit(DI/DO) ,32-bit(Memory) |
I/O Connector |
Male 20-bit ribbon x 2 |
Dimensions (L x W) |
140 mm x 90 mm |
Power Consumption |
420 mA @ +5 V |
Accuracy |
0.01 % of FSR +/- 1 LSB |
Operating Temperature |
-20 ~ 60 °C |
Storage Temperature |
-40 ~ 85 °C |
Humidity |
0 ~ 90% RH, non-condensing |
|
|