The PIO-D64 provides 32 digital input channels, 32 output channels and 6 counter/timer channels. The PIO-D64 consists of two 16-bit input ports and two 16-bit output ports. Users can use the DB-16P to connect the input ports (CN2 and CN4) for isolation purposes. The DB-16R can be used to interface the output ports (CN1 and CN3) for relay control. There are four-clock sources: 2M, 1M, 500K and 250K on the board; users can use the clock sources from the soldering pad. The on board timer / counter provides 3 channels for frequency measurement, event counting and pulse generation. The second 8254 provides 3 channels for interrupt function. It can be installed in a 5V PCI bus and can support true "Plug & Play".
- Double side SMT, short card
- Provides four 20-pin flat cable connector to DB-16P, DB-16R daughter board
- 32-bit digital input Lines and 32-bit digital output lines
- One 16-bit counter and One 32-bit counter with 4 Mhz time base
- 3 independent programmable 16-bit down counter
- Programmable interrupt handling
- Five 20-pin headers
- Output status readback
- Interrupt trigger by: Even / Timer trigger
- DIO response time is about 0.77 us (1.3 MHz max.)