|
|
|
PISO-Encoder600 - PCI Bus 6 axes Encoder input board
by ICP DAS
|
|
|
|
PCI Bus 6 Axis Encoder Input Board. Includes CA-SC68, SCSI-II 68-pin Male Connector (Solder Type)
|
|
|
PISO-ENCODER/300/600 has a 3-axis or 6-axis encoder counter. Each axis has a 32-bit, true counter with maximum counting rate of 1MHz. The Index reset resets by using a C+/C- channel, which will reset every revolution. The hardware reset resets by an external pin (HR1 ~ HR6). The HR1 ~ HR6 also can be a digital input. 8-channel digital outputs are also provided. 2500Vrms photo couplers isolate the digital I/O. This board provides DOS, windows 95 and windows NT drivers.
The counting mode has 3 types of selections:
- QUADRANT mode,
- CW_CCW mode
- PULSE_DIR mode.
3 kinds of counter reset modes are provided:
- Register Reset
- Index Reset
- Hardware Reset.
- PCI bus
- 3-axis Encoder counter
- True 32 bits counter
- Maximum counting rate: 1MHz.
- Third-order internal digital filter.
- Counting mode: Quadrant, CW_CCW, PULSE_DIR
- A+, A-, B+, B-, C+, C- inputs.
- Programmable reset counter function.
- Index (C channel) reset counter function.
- Hardware reset (HR1 ~ HR6), reset counter function
- SCSI-II 68-pin connector.
| Number of axis |
3 or 6 |
| Counter Resolution |
32-bit |
| Maximum pulse rate |
1MHz. |
| Connector |
SCSI-II 68-pin female connector |
| Power Consumption |
+5V @ 500mA |
| Operating Temperature |
0°C to 60°C |
| Storage Temperature |
-20°C to 80°C |
| Humidity |
0 to 90% (non-condensing) |
| Dimensions |
157mm x 106mm |
| PCI bus |
| 8 digital outputs |
| 2500V optical isolation |
|
|
