ICP DAS PET-7260A - 6 Channel Relay outputs and 6 Channel DI, Dry / Wet Contacts
by ICP DAS

ICP DAS PET-7260A

The PET-7260A provides full networking capabilities, and a variety of I/O functions, together with a web-based user interface server for easy configuration. The PET-7260A can be remotely controlled using the Modbus TCP/UDP protocol. This makes the PET-7260A to be well integrated with HMI, SCADA, PLC, and other industrial control software systems.

The PET-7260A comes with two built-in Ethernet switch ports, which are helpful to reduce implementation costs as there is no need to install an additional switch in order to daisy chain the ports or to extend the network via the Ethernet line.

The PET-7260A supports IEEE 802.3af Power-Over-Ethernet (Class 1) specifications. By connecting to network devices that support the IEEE 802.3af PoE standard, power can be supplied via a copper Ethernet cable.

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.

Specifications

• Built-in web server: yes
• CPU Module
  • watchdog timer: module, communication (programmable)
• 2-Way Isolation: I/O: 3000 VDC
• EMS protection
  • EFT (IEC 61000-4-4): ±4 kV for Power Line
  • ESD (IEC 61000-4-2):
    • ±4 kV Contact for Each Terminal
    • ±8 kV Air for Random Point
  • Surge (IEC 61000-4-5): ±2 kV for Power Line
• LED indicators
  • status: Run, Ethernet, I/O, PoE
• Digital Input/ Counter
  • Channels: 6
  • Type: dry contact, wet contact
  • Sink/Source (NPN/PNP): dry: source; wet: sink/source
  • ON voltage level: dry: close to GND; wet: 10~50 VDC
  • OFF voltage level: dry: open; wet: 4 VDC (max.)
  • Max. counts: 4,294,967,295 (32-bit)
  • Frequency: 100 Hz
  • Min. pulse width: 5 ms
  • Effective distance: 500 m (max.)
  • Input impedance: 10 kΩ
  • Overvoltage protection: 70 VDC
• Relay Output
  • Channels: 6
  • Type: Power Relay, Form A (SPST N.O.)
  • Contact Rating: 5 A @ 250 VAC / 24 VDC (Resistive Load)
  • Operate Time: 10 ms (max.)
  • Release Time: 5 ms (max.)
  • Electrical Endurance: 10^5 ops.
  • Mechnical Endurance: 2 x 10^7 ops.
  • Power on value: programmable
  • Safe value: programmable
• Ethernet
  • Ports: 2 x RJ-45, 10/100 Base-TX, Switch Ports
  • PoE: yes
  • LAN bypass: yes
  • Access Control: ID, password and IP filter
  • Protocol: Modbus TCP, Modbus UDP
• Power
  • Reverse polarity protection: yes
  • Consumption: 3.8W (max.)
  • Powered from PoE: IEEE 802.3af, class 1
  • Powered from terminal block: 12~48 VDC
• Mechanical
  • Dimensions (mm): 76 x 120 x 42 (W x L x H)
  • Installation: DIN-rail mounting
• Environment
  • Operating temperature: -25~75ºC
  • Storage temperature: -30~80ºC
  • Humidity: 10~90% RH, no condensation