|
|
|
ICP DAS WISE-7119 - 8 channel Universal Analog Input and 4 channel Isolated output
by ICP DAS
|
|
|
|
8-channel Analog Input with High Voltage Protection and 4-channel Isolated Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP. MiniOS7 Operating System.
|
|
|
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.
WISE-7119 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7119 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
This multi-function module WISE-7119 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel differential analog inputs and 4-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240 Vrms high over voltage protection.
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule engine for logic operation
- No more programming. Just click and get done!
- Support IO, Counter, Timer, Email operations
- Modbus/TCP Protocol for SCADA Software Seamless Integration
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- 10/100 Base-TX Ethernet
- Support Current Input, Voltage Input and Thermocouple Input
- Over Voltage Protection is up to 240 Vrms
- 4-channel Digital Outputs
- 2-way Isolation/ESD Protection
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.
| Analog Input |
| Input Channels |
8 (Differential) |
| Input Type(jumper selectable) |
+/-15 mV, +/-50 mV, +/-100 mV, +/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V |
| Thermocouple (J, K, T, E, R, S, B, N, C, L, M,LDIN43710) |
| +/-20mA, 0~20mA, 4~20mA |
| Resolution |
16-bit |
| Sampling Rate |
10 samples/Sec. total |
| Accuracy |
+/-0.1% or better |
| Zero Drift |
+/-10 μV/°C |
| Span Drift |
+/-25 ppm/°C |
| Input Impedance |
Voltage |
>1 MΩ |
| Current |
125 Ω |
| Common Mode Rejection |
86 dB Min. |
| Normal Mode Rejection |
100 dB |
| Over Voltage Protection |
240 Vrms |
| Individual Channel Configuration |
Yes |
| Open Wire Detection |
Yes |
| Digital Output |
| Output Channels |
4 |
| Output Type |
Isolated Open Collector (Sink) |
| Max. Load Current |
700 mA/Channel |
| Load Voltage |
5 VDC ~ 50 VDC |
| Overvoltage Protection |
60 VDC |
| Overload Protection |
1.4 A |
| Short-circuit Protection |
Yes |
| System |
| CPU |
16-bit CPU |
| SRAM |
512 KB |
| Flash Memory |
512 KB |
| EEPROM |
16 KB |
| Watchdog |
Yes |
| Communication |
| PoE Ethernet Port |
10/100 Base-TX and automatic MDI/MDI-X |
| 2 Way Isolation |
| I/O |
2500 VDC |
| EMS Protection |
| ESD (IEC 61000-4-2) |
4 kV Contact for each terminal and 8 kV Air for random point |
| EFT (IEC 61000-4-4) |
+/-4 kV for Power |
| LED Indicators |
| PoE |
PoE On |
| L1 |
System Running |
| L2 |
Ethernet Link/Act |
| L3 |
Ethernet 10/100M Speed |
| Power Requirements |
| Reserve Polarity Protection |
Yes |
| Powered from terminal block |
Yes, 12 ~ 48 VDC |
| Powered from PoE |
Yes, IEEE 802.3af, Class1 |
| Consumption |
3.4 W |
| Mechanical |
| Dimensions(W x L x H ) |
123 mm x 72 mm x 35 mm |
| Installation |
DIN-Rail or Wall mounting |
| Environment |
| Operating Temperature |
-25°C ~ +75 °C |
| Storage Temperature |
-30°C ~ +80 °C |
| Relative Humidity |
10 ~ 90% RH, non-condensing |
|
|
|
|
