|
|
CAN-2018D - 8 Thermocouple Input with CN-1824 daughter board by ICP DAS
|
|
|
DeviceNet Slave Module of 8-channel Voltage Input, Current Input and Thermocouple Inputs (Analog Input). Supports input types: +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V +/-20mA, Thermocouple Types (J, K, T, E, R, S, B, N, C). Includes CN-1824 Daughter Board
|
|
|
DeviceNet is one kind of network protocol based on the CAN bus, it's mainly used for the embedded network of the machine control, such as industrial machine control, aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, packaging machines control, etc.
The CAN-2018D follows DeviceNet specification Volume I/II, Release 2.0. User can access the thermocouple input status and set the configuration via DeviceNet EDS file. CAN-2018D has 8-channel thermocouple input and it can be used for various applications. By the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements.
DeviceNet Interface |
DeviceNet Specification |
Volume I, Release 2.0 & Volume II, Release 2.0, Errata5 |
DeviceNet subscribe |
Group 2 Only Server |
Connection supported |
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O |
Baud Rate
Setting by Rotary Switch |
125 kbps, 250 kbps, 500 kbps |
Node ID
Setting by Rotary Switch |
0 ~ 63 |
Heartbeat message |
Yes |
Shutdown message |
Yes |
Terminator Resistor |
Switch for 120 Ω terminator resistor |
Connector |
5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
EDS file |
Yes |
Analog Input |
Channels |
8 |
Input Type |
+/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V
+/-20mA,(Requires Optional External 125 Ohm Resistor)
Thermocouple (J, K, T, E, R, S, B, N, C) |
Resolution |
16-bit |
Sampling Rate |
10 Samples/Sec. (Total) |
Accuracy |
+/-0.1% FSR |
Zero Drift |
+/- 10 μV/ °C |
Span Drift |
+/- 25 ppm/ °C |
Common Mode Rejection |
86 dB |
Normal Mode Rejection |
100 dB |
Input Impedance |
>400 kΩ |
Individual Channel Configuration |
Yes |
Open Thermocouple Detection |
Yes |
Over voltage Protection |
240 Vrms |
ESD Protection |
+/-4kV, Contact for each terminal. |
Intra-module Isolation, Field to Logic |
3000 VDC |
LED |
Power |
PWR, red |
DeviceNet Status |
NET/MOD, green/orange |
Power |
Power Supply |
Unregulated +10 ~ +30 VDC |
Power Consumption |
1.5 W |
Mechanism |
Installation |
DIN-Rail |
Dimensions |
33 mm x 99 mm x 78 mm (W x L x H) |
Environment |
Operating Temp. |
-25 ~ 75 ℃ |
Storage Temp. |
-30 ~ 80 ℃ |
Humidity |
10 ~ 90% RH, non-condensing |
Thermocouple Type
Type Code |
Temperature Range (°C) |
J |
-210 °C ~ +1200 °C |
K |
-270 °C ~ +1372 °C |
T |
-270 °C ~ +400 °C |
E |
-270 °C ~ +1000 °C |
R |
-50 °C ~ +1765 °C |
S |
-50 °C ~ +1765 °C |
B |
0 °C ~ +1820 °C |
N |
-270 °C ~ +1300 °C |
C |
0 °C ~ +2320 °C |
|
|