|
|
F-8017C1 - Analog Input Module, 8 channels, 4 ~ 20 mA, Isolated by ICP DAS
|
|
|
8-channel Isolated Current Input Redundant Module for DCS systems, 500 Samples/sec sampling rate, supports operating temperatures from -25°C~ +75°C
|
|
|
The F-8017C1 is a 16-bit, 8-channel analog differential input module. This module accepts current input range 4~20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has ±0.05% accuracy for highly accurate application. Moreover, this module provides 500Hz sampling rate for some application. The F-8017C1 provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
- 8 current input channels
- Overrange measurement
- RoHS compliance
- 3000 VDC isolation from input to backplane
- 3000 VDC isolation from input to frame ground
- Redundancy
- Fast redundant switching time (<100us)
Feature |
Redundant |
Yes (Switching time < 100us) |
Over-Current Protection |
Yes |
Termination board break off detection |
Yes |
LED indicator |
1 RUN, 1 ACT, 1 DUX |
Analog Input |
Number of channels |
8 |
Type |
4 ~ 20 mA (Support ±25% overrange |
Maximum Allowable Input Current |
25 mA |
Resolution |
16 bit |
Sampling Rate |
500 Samples/sec(Total) |
Accuracy |
±0.05% FSR |
Zero Drift |
±20 μV/°C |
Common Mode Rejection |
86 dB |
Normal Mode Rejection |
100 dB |
Input Impedance |
230 Ω |
Data Range |
-2500~12500 (0 ~ 24 mA) |
Isolation |
3000 VDC |
Certification |
EMC |
EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4 |
General |
Termination board |
DN-AIO-M |
Maximum power consumption |
1.5 W |
Operating temperature |
-25°C~ +75°C |
Humidity |
5 ~ 95 % RH, Non-condensing |
Weight |
300 g |
Dimensions (W x L x H) |
30 mm x 85 mm x 115 mm |
|
|