|
|
|
F-8017C2 - 16 Channel Current Input Module
by ICP DAS
|
|
|
|
16-channel Isolated Current Input Redundant Module with 4 ~ 20mA input types. Works with iDCS-8000 Rugged Redundant I/O Rack.
|
|
|
The F-8017C2 is a 16-bit, 16-channel analog differential input module. This module accepts current input range 4 ~ 20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has ±0.05% accuracy for highly accurate application. Moreover, this module provides 1kHz sampling rate for some application. The F-8017C2 provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
- 16 current input channels
- 1kHz sampling rate
- Overrange measurement
- RoHS compliance
- 3000 VDC isolation from input to backplane
- 3000 VDC isolation from input to frame ground
- Redundancy
- Fast redundant switching time (<100us)
| Feature |
| Redundant |
Yes (Switching time < 100us) |
| Over-Current Protection |
Yes |
| Termination board break off detection |
Yes |
| LED indicator |
1 RUN, 1 ACT, 1 DUX |
|
| Analog Input |
| Number of channels |
16 |
| Type |
4 ~ 20 mA (Support ±25% overrange) |
| Maximum Allowable Input Current |
25 mA |
| Resolution |
16 bit |
| Sampling Rate |
1k Samples/sec (Total) |
| Accuracy |
±0.05% FSR |
| Zero Drift |
±20 μV/°C |
| Normal Mode Rejection |
100 dB |
| Common Mode Rejection |
86 dB |
| Input Impedance |
230 Ω |
| Data Range |
-2500 ~ 12500 (0~24mA) |
| Isolation |
3000 VDC |
|
| Certification |
| EMC |
EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4 |
|
| General |
| Termination board |
DN-AIO-M |
| Maximum power consumption |
1.5 W |
| Operating temperature |
-25°C ~ +75°C |
| Humidity |
5 ~ 95 % RH, Non-condensing |
| Weight |
300 g |
| Dimensions (W x L x H) |
30 mm x 85 mm x 115 mm |
|
|
