|
|
|
F-8028CV - Analog Output Module, 8 channels, 4 ~ 20 mA, 0 ~ 20 mA, 0 ~ 5V, 0 ~ 10V, +/-5V, +/-10V, Isolated
by ICP DAS
|
|
|
|
8-channel Isolated Analog Output Redundant Module for DCS systems, supports operating temperatures from -25°C ~ +75°C
|
|
|
The F-8028CV is a 16-bit, 8-channel analog output module that features programmable output range on all channels. It provides digital to analog conveter controlled by the system module to convert the digital data into output signals. Users can specify the start up and safety value through configuration software. Moreover, this module has ±0.05% accuracy for highly accurate application. Besides, the F-8028CV provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
- 8 current/voltage output channels
- Overrange output
- Short circuit protection
- Open wire detection
- RoHS compliance
- 3000 VDC isolation from output to backplane
- 3000 VDC isolation from output to frame ground
- Redundancy
- Fast redundant switching time (<1 ms)
| Feature |
| Redundant |
Yes (Switching time < 1 ms) |
| Termination board break off detection |
Yes |
| Short Circuit Protection |
Yes |
| Open Wire Detection |
Yes (4 ~ 20 mA) |
| Power-On Value |
Yes |
| Safety Value |
Yes |
| LED indicator |
1 RUN, 1 ACT, 1 DUX |
| Analog Output |
| Number of channels |
8 |
| Type |
0 ~ 20 mA, 4 ~ 20 mA (current sourcing)
0 ~ 5 V, ±5 V, 0 ~ 5 V, ±10 V |
| Maximum Allowable Output Range |
0 ~ 20 mA |
+20% (0 ~ 24 mA) |
| 4 ~ 20 mA |
±25% (0 ~ 24 mA) |
| 0 ~ 5 V |
+20% (0 ~ 6 V) |
| ±5 V |
±20% (±6V) |
| 0 ~ 5 V |
+20% (0 ~ 12 V) |
| ±10 V |
±20% (±12V) |
| Resolution |
16 bit |
| Output Response Time |
<200 μS |
| Accuracy |
±0.05% FSR |
| Zero Drift |
±0.2 μV/℃ |
| Span Drift |
±25 ppm/℃ |
| Output Capacity |
Current |
750 Ω |
| Voltage |
500 Ω |
| Data Range |
-2500 ~ 12500 |
| Isolation |
3000 VDC |
| Certification |
| EMC |
EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4 |
| General |
| Termination board |
DN-AIO-M |
| Maximum power consumption |
1 W |
| Operating temperature |
-25°C ~ +75°C |
| Humidity |
5 ~ 95 % RH, Non-condensing |
| Weight |
300 g |
| Dimensions (W x L x H) |
30 mm x 85 mm x 115 mm |
|
|
