|
|
|
F-8041 - Digitial Output Module, 32 points, sink, 0.1A / point, Isolated, one COM for all DO, LED display
by ICP DAS
|
|
|
|
32-channel Isolated Digital Output Redundant Module for DCS systems, supports operating temperatures from -25 °C ~ +75 °C
|
|
|
The F-8041 is a digital output module with 32 NPN channels. The output channel of F-8041 is a current sinking channel and can drive the load up to 0.5A current. The digital output channels offer LED to indicate digital output status. Moreover, the module offers 3000 VDC optical isolation between channels and backplane bus. If any high voltage or current damages the channels, the system (backplanes, other modules, and control unit) won't be affected because the benefit of isolation.
- 32 digital output (sink) channels
- Safety value (Preset/Hold)
- Power-on(Initial) value
- Output channel LED indication
- RoHS compliance
- 3000 VDC isolation from output to backplane
- 3000 VDC isolation from output to frame ground
- Redundancy
- Fast redundant switching time (<100us)
| Feature |
| Redundant |
Yes (Switching time < 100us) |
| Termination board break off detection |
Yes |
| Safety output |
Yes (Preset/Hold) |
| Power-on (Initial) output |
Yes |
| LED indicator |
1 RUN, 1 ACT, 1 DUX |
| 32 as channel 0~31 status |
| Digital Output |
| Channels |
32 (NPN) |
| Type |
Current sinking, Open-collector |
| Rated voltage |
36 VDC |
| Output load current, maximum |
0.5 A |
| Output switching time |
100 us |
| Output impedance |
2 Ω |
| Isolation |
3000 VDC |
| Certification |
| EMC |
EN61000-6-2, EN61000-6-4
IEC/EN 61000-4-2, IEC/EN 61000-4-4 |
| General |
| Termination board |
DN-DO-16DR-A, DN-DO-16DR-B, DN-DIO-M |
| Maximum power consumption |
2.1 W @ 24 VDC |
| Operating temperature |
-25 °C ~ +75 °C |
| Humidity |
5 ~ 95 % RH, Non-condensing |
| Weight |
300 g |
| Dimensions (W x L x H) |
30mm x 85mm x 115mm |
|
|
