I-7540DM-MTCP - CAN to Modbus TCP Converter with Metal Case

ICP DAS I-7540DM-MTCP - CAN to Modbus TCP Converter with Metal Case
by ICP DAS

I-7540DM-MTCP_SUMMARY.html

80186-80 Embedded CPU, or compatible
Ethernet Protocols, TCP,UDP,IP,ICMP,ARP
COM driver support interrupt & 1K QUEUE Input & Output buffer
Provide 200 CAN frames buffer in CAN to Modbus Mode
NXP 82C 250 CAN Transceiver
Support both CAN specification 2.0A and 2.0B
Max transmission speed up to 1M bps for CAN and 115.2kbps for RS-232 & RS-485
Max transmission distance of CAN over 1000m (follow CAN specification)
7-segment LED display to Module IP, RS-232 baud rate, CAN configuration
CAN Error/Tx/Rx LED indicator
Software configurable CAN and RS-232 communication parameters
Firmware updated from COM1 or Ethernet port
Support Web Configuration
Support maximum 24 Ethernet clients connection
Support function code 0x03/0x04/0x10 of Modbus TCP/RTU command for reading and writing CAN message
Provide the transparent communication between the CAN devices via Ethernet
Support 30 specific CAN IDs in the Modbus TCP/RTU mode

I-7540DM-MTCP_DESCRIPTION.html I-7540DM-MTCP - CAN to Modbus TCP Converter with Metal Case

I-7540DM-MTCP.html

LED Indicators
Status	1 x Power
COM Ports
Ports	1 x RS-232 1 x RS-485 (self-turner ASIC inside)
Baud Rate	110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Parity	None, Even, Odd
Data Bit	7, 8
Stop Bit	1
Ethernet
Ports	1 x RJ-45, 10/100Base-T(X)
CAN
Controller	NXP SJA1000T with 16 MHz clock
Ports	1
Baud Rate	10 k ~ 1 M bps
Isolation	1000 VDC for DC-to-DC, 2500 Vrms for photo-coupler
Terminal Resistor	Jumper for 120&ohm; terminal resistor
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter	Yes
Power
Input Range	+10 VDC ~ +30 VDC
Consumption	2.5 W
Mechanical
Casing	Metal
Dimensions (mm)	72 x 122 x 33 (W x L x H)
Installation	DIN-Rail
Environmental
Operating Temperature	-25 ~ +75C
Storage Temperature	-30 ~ +80C
Humidity	10 ~ 90% RH, Non-condensing