I-87017RCW - 8-channel Current Input Module with High Over voltage protection
by ICP DAS

I-87017RCW has a serial bus (RS-485) communication interface with DCON protocol. It can work with our XPAC, WinPAC, and ViewPAC controllers. I-87017RCW is an Analog Input Module with 8 differential channels. I-87017RCW is a serial cartridge based I/O module that offers the ultimate in cost-effective flexibility.

Analog Input
Input Channels	8 Differential
Input Type	0 ~ +20mA, +4 ~ +20mA,  -20mA ~ +20mA (No External Restistor Reguired)
Resolution	16-bit / 12-bit
Sampling Rate	Normal Mode : 16-bit,10 Samples/ sec (Total)
	Fast Mode : 12-bit,60 Sample/ sec (Total)
Accuracy	Normal Mode :+/- 0.1% of FSR
	Fast Mode :+/- 0.5% of FSR
-3dB BandWidth	15.7Hz
Zero Drift	+/- 20μV/ °C
Span Drift	+/- 25 μV/ °C
Common Mode Rejection	86 dB
Normal Mode Rejection	100 dB
Input Impedance	125 Ohms
Common Voltage	-200V to +200V
Open Wire Detection	Yes
4KV ESD Protection	Yes, Contact for each terminal.
Intra-module Isolation, Field to Logic	3000VDC
LED Display
1 LED as Power/ Communication Indicator
16 LEDs as High/ Low Alarm Signals
Power
Power Consumption	Maximum : 1.3W
Environment
Operating Temperature	-25 to 75 °C
Storage Temperature	-30 to 75 °C
Humidity	5 to 95% RH, non-condensing
Dimensions
30mm x 102mm x 115mm(W x L x H)

I-87017RCW.pdf

241 K