I-87069W has a serial bus (RS-485) communication interface with DCON protocol. It can be used with our WinPAC, XPAC, ViewPAC, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87069W is a Photo Mos Relay Output Module with 8 channels. I-87069W is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility.
Digital Output |
Output Channels |
8 |
Output Type |
PhotoMOS Relay, Form A |
Load Voltage |
350V max. at DC/ AC |
Load Current |
0.13A max. |
Turn On Time |
0.7m s (Typical) |
Turn Off Time |
0.05ms (Typical) |
Peak Load Current |
0.4A at 100ms |
Output Off State Leakage Current |
1 uA |
Output On Resistance |
23 Ohms |
Intra-module Isolation, Field to Logic |
5,000Vrms |
4KV ESD Protection |
Yes, contact for each terminal |
LED Display |
1 LED as Power/ Communication Indicator |
8 LEDs as PhotoMos Relay Output Indicators |
Power |
Power Consumption |
0.5W |
Environment |
Operating Temperature |
-25 to 75 °C |
Storage Temperature |
-30 to 75 °C |
Humidity |
5 to 95% RH, non-condensing |
Dimensions |
30mm x 102mm x 115mm(W x L x H) |
|