|
|
M-7024UD - M-7024U with display by ICP DAS
|
|
|
Multifunctional I/O module with LED display, 4-channel Analog Output (Current Output), 4-channel Digital Input (Counters) and 4-channel Digital Output. Supports Analog Output Types of 0 ~ 5 V, +/-5 V, 0 ~ 10 V, +/-10 V, +4 ~ +20 mA or 0 ~ +20 mA. Digital Input Types: Wet Contact, Dry Contact, and Counter. Supports Digital Output of Open Collector (Sink). Communicates over Modbus RTU and RS-485. Supports operating temperatures of -25°C ~ +75°C (-13°F ~ +167°F).
|
|
|
The M-7024UD is a multi-functional module that has 4 analog output channels, 4 digital input channels, and 4 digital output channels. It also comes with a LED display as I/O indicators. It provides a programmable output range on all analog outputs channels (0 ~ 5 V, +/-5 V, 0 ~ 10 V, +/-10 V, +4 ~ +20 mA or 0 ~ +20 mA). Each analog output channel can be configured for an individual range and the module also features per-channel open wire detection for +4 ~ +20 mA outputs, together with 8 kV ESD Protection as well as 2500 VDC intra-module isolation. Options for configuring power-on and safe values are also included. It also comes with our free EZ Data Logger software for data logging, data acquisition, control and monitoring applications.
- Multi-function=4 AO + 4 DI + 4 DO
- Comes with LED Display for I/O Indication
- Source Type Current Output
- 16-bit Analog Output
- Individual Channel Configuration
- Open Wire Detection for Current Output
- 8 kV ESD Protection
- Power-on Value Setting
- Safe Value Setting
- Wide Operating Temperature Range: -25 to +75°C
Specifications
Communication |
Interface |
RS-485 |
Bias Resistor |
No (Usually supplied by the RS-485 Master. Alternatively,
add a tM-SG4 or SG-785.) |
Format |
(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
Baud Rate |
1200 to 115200 bps |
Protocol |
Modbus RTU, DCON |
Dual Watch Dog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
LED Indicators/Display |
System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
I/O LED Indicator |
4 LEDs as Analog Input Fault Indicators, 4 LEDs as Digital Input Indicators, 4 LEDs as Digital Output Indicators |
7-Segment LED Display |
- |
Isolation |
Intra-Module Isolation,
Field-to-Logic |
2.5 kVDC |
EMS Protection |
ESD (IEC 61000-4-2) |
±8 kV Contact for each Terminal |
EFT (IEC 61000-4-4) |
±4 kV for Power Line |
RS (IEC 61000-4-5) |
- |
Power |
Reverse Polarity Protection |
Yes |
Input Range |
10 ~ 30 VDC |
Consumption |
4.5 W |
Mechanical |
Dimensions (L x W x H) |
123 mm x 72 mm x 35 mm |
Installation |
DIN-Rail or Wall Mounting |
Environment |
Operating Temperature |
-25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temperature |
-40°C ~ +85°C (-40°F ~ +185°F) |
Humidity |
10 ~ 95% RH, Non-condensing |
I/O Specification
Analog Output |
Channels |
4 |
Current Output Wiring |
Source |
Range |
0 ~+5 VDC, ±5 VDC, 0 ~ +10 VDC, ±10 VDC,
0 ~ +20 mA, +4 ~ +20 mA |
Resolution |
16-bit |
Accuracy |
±0.02%% of FSR |
DA Output Response Time |
10 ms per channel |
Programmable Output Slope |
ON Voltage Level |
0.0625 ~ 512 V/Second |
OFF Voltage Level |
0.125 ~ 1024 mA/Second |
Open Wire Detection |
1000 Ω |
Short Circuit Protection |
Yes |
Power-on Value |
Yes, Programmable |
Safe Value |
Yes, Programmable |
Digital Input |
Channels |
4 |
Wet Contact |
ON Voltage Level |
+1 VDC Max. |
OFF Voltage Level |
+4 ~ 30 VDC |
Dry Contact |
ON Voltage Level |
Close to GND |
OFF Voltage Level |
Open |
Effective Distance for Dry Contact |
500 M Max. |
Counters |
Max. Count |
65535 (16-bit) |
Max. Input Frequency |
100 Hz |
Min. Pulse Width |
5 ms |
Input Impedence |
|
- |
Overvoltage Protection |
|
+60 VDC |
Digital Output |
Output Channels |
4 |
Type |
Open Collector |
Sink/Source (NPN/PNP) |
Sink |
Load Voltage |
+3.5 VDC ~ +50 VDC |
Max. Load Current |
700 mA/Channel |
Overvoltage Protection |
60 VDC |
Overload Protection |
1.4 A (with short-circuit protection) |
Power-on Value |
Yes, Programmable |
Safe Value |
Yes, Programmable |
|
|