|
|
|
M-7067D - 7 Channel Form A Relay Output Data Acquisition Module with Modbus Protocol with LED Display communicable over Modbus R
by ICP DAS
|
|
|
|
7 Channel Form A Relay Output Data Acquisition Module with Modbus Protocol
with LED Display communicable over Modbus RTU and RS-485, supports operating
temperatures from -25 to 75°C
|
|
|
The M-7000 series is a family of network data acquisition and control modules
that support Modbus RTU. They can be remotely controlled using a set of commands
called DCON protocol. With the Modbus RTU protocol, it can easily communicate
with most popular SCADA/ HMI software and PLCs.
- Communication Interface: RS-485
- Four isolated channels with common power
- Digital Output Channels: 7
- Relay output
- D/I can be used as counter
- LED indicated
- Digital I/O status
- DCON and Modbus Protocol
- Din Rail Mount
|
Communication |
|
Interface |
RS-485 |
|
Format |
(N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1) |
|
Baud Rate |
1200 ~ 115200 bps |
|
Protocol |
Modbus RTU, DCON |
|
Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
|
LED Indicators/Display |
|
System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
|
I/O LED Indicators |
- |
|
7-Segment LED Display |
Yes, 7 LEDs as Digital Input/Relay Output Indicators |
|
Isolation |
|
Intra-module Isolation, Field-to-Logic |
1500 VDC |
|
EMS Protection |
|
ESD (IEC 61000-4-2) |
±4 kV Contact for each Termina |
|
±8 kV Air for Random Point |
|
EFT (IEC) 610004-4) |
± 2kV for Power Line |
|
Surge (IEC 610004-5) |
- |
|
Power |
|
Reverse Polarity Protection |
Yes |
|
Input Range |
10~30VDC |
|
Consumption |
1.5 W |
|
Mechanical |
|
Dimensions (W x L x H) |
72 mm x 123 mm x 35 mm |
|
Installation |
DIN-Rail or Wall Mountable |
|
Environment |
|
Operating Temperature |
-25°C to +75°C (-13°C ~ +167°F) |
|
Storage Temperature |
-40°C to 85°C (-40°F ~ +185°F) |
|
Humidity |
10 to 95%, Non-condensing |
I/O Specifications
|
Relay Output |
|
Channels |
7 (Form A) |
|
Relay Type |
Signal Relay |
|
Form A Relay |
Contact Rating |
0.5 A @ 120 VAC 1 A @ 24 VDC |
|
Min. Contact Load |
1 mA @ 1 V |
|
Contact Material |
Gold overlay silver palladium |
|
Operating Time |
5 ms |
|
Release |
2 ms |
|
Mechanical Endurance |
5 x 10^6 ops. |
|
Electrical Endurance |
10^5 ops. |
|
Surge Strength |
1500 VDC |
|
Power-on Value |
Yes |
|
Safe Value |
Yes |
|
|
