|
|
M-7088D - 8-Channel PWM Isolated Output and 8-Channel High Speed Counter Digital Input Module (Frequency), communicable over RS- by ICP DAS
|
|
|
8-Channel PWM Isolated Output and 8-Channel High Speed Counter Digital Input
Module (Frequency), communicable over RS-485 and Modbus RTU, with Voltage Input
with display
|
|
|
M-7088 has 8 PWM output channels and 8 counter inputs. It can be used to
develop powerful and cost effective analog control system. PWM (Pulse width
modulation) is a powerful technique for controlling analog circuits. It uses
digital outputs to generate a waveform with variant duty cycle and frequency to
control analog circuits. It can be used to Controlling the position/speed of
motors, Dimming the brightness of lamps, Controlling the speed of fans… etc.
Features
- Automatic generation of PWM outputs by hardware, without software
intervention.
- 10Hz ~ 500KHz PWM output frequency with 0.1%~99.9% duty cycle
- Software and hardware trigger mode for PWM output
- Individual and synchronous PWM output
- Using software trigger mode, you can set configuration for all PWM channels then
trigger them one by one or all of them at the same time.
- Burst mode PWM operation for standby
- DI channel can be configured as simple digital input channel or hardware trigger
source of the PWM output.
PWM Output |
Channels |
8 |
Type |
TTL, Isolated |
Max. Frequency |
1Hz~500KHz |
Duty Cycle |
0.1%~99.9% |
PWM Mode |
Burst mode, Continuous mode |
Burst mode counter |
1~65535 counts |
Trigger Start |
Hardware or Software |
ESD Protection (IEC 61000-4-2) |
4 kV Contact for each terminal and 8 kV Air for random point |
Isolation |
2500 VDC |
Digital Input |
Channels |
8 |
Type |
Sink, Isolated |
ON Voltage Level |
+2.4V~+5V |
OFF Voltage Level |
+1V Max. |
Max. Frequency |
1MHz |
Max. Counts |
32-bits (4,294,967,295) |
Built-in Virtual Battery Backup for Counter Value |
Yes |
ESD Protection (IEC 61000-4-2) |
4 kV Contact for each terminal and 8 kV Air for random point |
Isolation |
2500 VDC |
Interface |
Interface |
RS-485 |
Format |
N, 8, 1 |
Baud Rate |
1200 ~ 115200bps |
Power |
Input Voltage Range |
10 ~ 30 VDC |
Power Consumption |
2.4 W (max.) |
Power reverse polarity protection |
Yes |
+/- 4 kV ESD , +/- 4 kV EFT and +/- 3 kV Surge Protection |
Yes |
Environment |
Operating Temperature |
-25 ~ 75°C |
Storage Temperature |
-40 ~ 85°C |
Humidity |
5 ~ 95%, non-condensing |
|
|