ADAM-4021-DE The ADAM-4000 series is a set of intelligent sensor-to-computer interface analog I/O modules containing a built-in microprocessor. They are remotely controlled through a simple set of commands issued in ASCII format and transmitted in RS-485 protocol.The 4000 series provide signal conditioning, isolation, ranging, A/D and D/A conversion, data comparison, and digital communication functions. Some modules provide digital I/O lines for controlling relays and TTL devices.Buy and compare our RS-485 I/O modules below. Click on each model number to view a photo and see the Details, Specs, Documentation, and Accessories tabs for further information.
Analog Output
- Effective Resolution: 12-bit
- Output Type: mA, V
- Output Range: 0 to 20 mA, 4 to 20 mA, and 0 to 10 V
- Isolation Voltage: 3000 VDC
- Output Impedance: 0.5 Ω
- Accuracy: ±0.1% of FSR for current output ±0.2% of FSR for voltage output
- Readback Accuracy: ±1% of FSR
- Resolution: ±0.015% of FSR
- Zero Drift Voltage output: ±30 µV/° C
- current output: ±0.2 µA/° C
- Span Temperature Coefficient; ±25 ppm/° C
- Programmable: 0.125 ~ 128 mA/sec. Output Slope 0.0625 ~ 64.0 V/sec.
- Current Load Resistor: 0 to 500 Ω (source)
Built-in Watchdog Timer Power
- Power Requirement Unregulated: |+10 ~ +30 VDC
- Power Consumption: 1.4 W @ 24 VDC