|
|
|
ICP DAS I-7018Z - *Discontinued* - 10-channel Universal Analog Input Module with high accuracy and high ESD protection
by ICP DAS
|
|
|
|
10 Channel Voltage Input, Current Input, & Thermocouple Input Data Acquisition Module with High Accuracy, High ESD Protection, communicable over RS-485, FREE EZ Data Logger Software and short cable. Supports operating temperatures between -25°C ~ +75°C (-13°F ~ +167°F).
|
|
|
-7018Z is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7018Z modules. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. I-7018Z comes with a daughter board for better CJC compensation. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to directly connect the units, and are also supplied with a 4" cable connector. I-7018Z comes with FREE EZ Data Logger Software.
**Kit includes 4" 25-pin connector cable, along with external module DIN-rail mounting kit**
 
| Analog Input |
| Input Channels |
10 Differential |
| Input Type |
+/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V
+/-20mA, 0~20mA, 4~20mA (Requires Optional External 125 Ohm Resistor)
Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710) |
| Resolution |
16-bit |
| Sampling Rate |
10 Samples/Sec (Total) |
| Accuracy |
+/- 0.1 % |
| -3dB BandWidth |
15.7 Hz |
| Zero Drift |
+/- 0.5 μV/°C |
| Span Drift |
+/- 25 ppm/°C |
| Common Mode Rejection |
150 dB |
| Normal Mode Rejection |
100 dB |
| Input Impedance |
>500k Ohms |
| Over voltage Protection |
240 Vrms |
| Open Thermocouple Detection |
Yes |
| Individual Channel Configuration |
Yes |
| Temperature outputs consistency |
Yes |
| Stable temperature output in the field |
Yes |
| Intra-module Isolation, Field to Logic |
3000VDC |
| Interface |
| Interface |
RS-485 |
| Format |
N, 8, 1 |
| Baud Rate |
1200 ~ 115200 bps |
| DB-1820 (3.81mm pitch) |
| Wire Strip Length |
4 ~ 5 mm |
| Wire Range |
16 ~ 24 AWG |
| DN-1822 (5.08mm ptich) |
| Wire Strip Length |
4 ~ 5 mm |
| Wire Range |
14 ~ 24 AWG |
| LED Display |
| 1 LED as Power/Communication Indicator |
| Power |
| Input |
+10 ~ +30 VDC |
| Power Consumption |
1.0W |
| Environment |
| Operating Temperature |
-25 ~ 75 °C |
| Storage Temperature |
-40 ~ 85 °C |
| Humidity |
5 ~ 95% RH, Non-condensing |
| Type |
Range (°C) |
| J |
-210 ~ +760 |
| K |
-270 ~ +1372 |
| T |
-270 ~ +400 |
| E |
-270 ~ +1000 |
| R |
0 ~ +1768 |
| S |
0 ~ +1768 |
| B |
0 ~ +1820 |
| N |
-270 ~ 1300 |
| C |
0 ~ 2320 |
| L |
-200 ~ +800 |
| M |
-200 ~ +100 |
| L (DIN43710) |
-200 ~ +900 |
|
|
