|
|
|
I-7060D - I-7060 with LED display
by ICP DAS
|
|
|
|
4 Channel Isolated Digital Input (Counter) and 4 Channel Relay Output Data Acquisition Module, communicable over RS-485. I-7060 with Display. Supports operating temperatures between -25°C ~ +75°C (-13°F ~ +167°F).
|
|
|
I-7060D is intelligently designed to provide signal conditioning system monitoring and safe value settings. I-7060D is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7060D Relay output and digital Input module. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. The communication interface is modbus protocol via RS-485. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals.
| Communication |
| Interface |
RS-485 Modbus RTU, DCON |
| Format |
(N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1) |
| Baud Rate |
1200 ~ 115200 bps |
| Protocol |
DCON |
| Dual Watchdog |
Yes, Module (1.6 Seconds), Communication over DCON |
| LED Indicators/Display |
| System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
| I/O LED Indicators |
- |
| Yes, 8 LEDs Digital Input/Relay Output Indicators |
| 7-Segment LED Display |
- |
| Isolation |
| Intra-Module Isolation, Field-to-Logic |
3750 VDC |
| EMS Protection |
| ESD (IEC 61000-4-2) |
±4 kV Contact for each Terminal |
| ±8 kV Air for Random Point |
| EFT (IEC 61000-4-4) |
±2kV for Power Line |
| Surge (IEC 61000-4-5) |
- |
| Protocol |
| Support Modbus and DCON Protocol |
Yes |
| Power |
| Reverse Polarity Protection |
Yes |
| Input Range |
10 ~ 30 VDC |
| Consumption |
1.4 W |
| Mechanical |
| Dimensions ( W x L x H) |
72 mm x 123 mm x 35 mm |
| Installation |
DIN-Rail or Wall Mounting |
| Environment |
| Operating Temperature |
-25 ~ +75°C |
| Storage Temperature |
-40 ~ +85°C |
| Humidity |
10 ~ 95% RH, Non-condensing |
I/O Specifications
| Relay Output |
| Channel |
4 (Form A x 2, Form C x 2) |
| Relay Type |
Signal Relay |
| Form A Relay |
Contact Rating |
0.6 A @ 125 VAC
2A @ 30 VDC |
| Min. Contact Load |
10uA @ 10 mV |
| Contact Material |
Gold-plated silver |
| Operate Time |
3 ms |
| Release Time |
2 ms |
| Mechanical Endurance |
10 x 10^8 ops. |
| Electrical Endurance |
5 x 10^5 ops. |
| Surge Strength |
1500 VDC |
| Power-on Value |
Yes |
| Safe Value |
Yes |
| Digital Input/Counter |
| Channel |
4 |
| Type |
Dry Contact |
0 |
| Wet Contact |
Sink/source |
| On Voltage Level |
+1VDC Max. |
| Off Voltage Level |
+4 ~ 30 VDC |
| Counters |
Max Count |
65535 (16-bit) |
| Max. Input Frequency |
100 Mhz |
| Min. Pulse Width |
5 ms |
| Input Impedance |
3 kΩ |
| Overvoltage Protection |
+/-35 VDC |
|
|
