I-7063BD - I-7063B with LED display
by ICP DAS

I-7063BD is intelligently designed to provide signal conditioning system monitoring and safe value settings. I-7063BD is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7063BD Isolated digital input & DC-SSR relay output module. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. The communication interface is modbus protocol via RS-485. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals.

Digital Input
Channels	8
Digital Input level	Isolated with common power
	Logic level 0: +1V max
	Logic level 1: +4V to+ 30V
	Isolation voltage	3750Vrms
	Input impedance	3KO , 0.5W
Input Frequency	100Hz
16-bit counter	0-65,535
8 Digital input channel with counter function
Relay Output
Channels	3
Interface	RS-485
Dry contact	Yes
Contact rating	DC:3~ 30Vdc @1.0Arms
Max. Load current	1.0Arms
Min. Load current	10mArms
Max. off-state leakage current	0.1mA(at 30Vdc)
1 Cycle surge current	3A(10ms)
Max. on-state voltage drop	1.2Vdc
Surge strength	4,000Vac
Relay on time(Max.)	1ms
Relay off time(Min.)	1ms
Insulation resistance	1,000MOhm min.at 500Vdc
Life time	long life, maintence free
form "A” relay SPST (N.O.)
Communication Interface
Interface	RS-485
Power Supply
Input Power	10~30Vdc
Consumption	0.6W max. for I-7063B 1.4W max. for I-7063BD

 

I-7063BD.pdf

246 K