I-7063D - I-7063 with LED display
by ICP DAS

I-7063D is intelligently designed to provide signal conditioning system monitoring and safe value settings. I-7063D is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7063 Power relay output module. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. The communication interface is modbus protocol via RS-485. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals.

Digital Input
Channels	8
Input Type	Sink, Source, isolated channels with common ground or power
Off Voltage Level	+1V max.
On Voltage Level	+4 to +30V
Input Impedance	3K Ohms, 0.5W
Counters	channels : 8
	Max. Counts: 16-bit (65535)
	Max. Input Frequency : 100Hz
	Min. Pulse Width : 5ms
Photo-Isolation	3750Vrms
Relay Output
Channels	3
Relay Type	Form "A” relay SPST (N.O.)
Contact Rating	AC: 250V @5A
	DC: 30V @5A
Operating Time(Max.)	6ms
Release Time(Min.)	3ms
Surge Strength	4,000VAC
Insulation Resistance	1000MOhms min. at 500VDC
Life Time	Mechanical : 20 X 10^6 OPS
	Electrical : 100 X 10^3 Full Load
Interface
Interface	RS-485
Format	N, 8, 1
Baud Rate	1200 ~ 115200bps
LED Display
1 LED as Power/ Communication indicator
8 LEDs as Digital Input indicators and 3 LEDs as Relay Output indicators (for I-7063D)
Power
Input Voltage Range	10~30VDC
Power Consumption	1.0W (max.)(I-7063) / 1.5W (max.)(I-7063D)
Environment
Operating Temperature	-25 to 75°C
Storage Temperature	-40 to 85°C
Humidity	5 to 95%, non-condensing

I-7063D.pdf

246 K