Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
I-7066 - 7 Photo-Mos relay module by ICP DAS

I-7066 - 7 Photo-Mos relay module
by ICP DAS

Write a review Write a review
7 Channel Photo MOS AC/DC 350V Relay Output Data Acquisition Module with Form A Relay Outputs. Communicable over RS-485. Supports operating temperatures between -25°C ~ +75°C (-13°F ~ +167°F).
Mfg SKU # : I-7066
List Price : $209.00
Our Price : $205.00
Stock : Call for Availability
Quantity :

I-7066 is intelligently designed to provide signal conditioning system monitoring and safe value settings. I-7066 is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7066 Digital Output & Isolated Digital Input module. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. The communication interface is modbus protocol via RS-485. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals.

Communication
Interface RS-485
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator -
7-Segment LED Display -
Isolation
Intra-Module Isolation, Field-to-Logic
5000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Line
EFT (IEC 61000-4-4) ±4 kV for 8 Relay and Power Line
±2 kV for RS-485 Port Line
Surge (IEC 61000-4-5) -
Power
Reverse Polarity Protection Yes
Input Voltage Protection 10 ~ 30 VDC
Consumption 0.4 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25°C ~ +75°C (-13°F +167°F)
Storage Temperature -40°C ~ +85°C (-40°F ~ 185°F)
Humidity 10 ~ 95% RH, Non-condensing

I/O Specification

Relay Output
Channel
7
Relay Type
Power Relay (Form A)
Form A PhotoMOS
Operating Load Voltage Range
350 V (AC peck or DC)
Continuous Load Current 0.13 A
Peak Load Current 0.4 A
Output Off State Leakage Current 1 uA
Operate Time 2 ms (Max.)
Release Time 1 ms (Max.)
Electrical Endurance Long Life, And No Arcing, No Bounce, And No Switching Noise
Power-on Value
Yes, Programmable
Safe Value
Yes, Programmable
I-7066.pdf161 K

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.