|
|
WF-2026 - 5 Channel AI, 2 Channel AO, 2 Channel DI and 3 Channel DO by ICP DAS
|
|
|
5-channel Analog Input (Current Input), 2-channel Analog Output, 2-channel Digital Input and 3-channel Digital Output Wi-Fi I/O Modbus/TCP and UDP Module. Supports DHCP Networks. Supports communication distance of up to 50 meters (164 feet). Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)
|
|
|
- Multifunction (5 AI, 2 AO, 2 DI and 3 DO)
- Individual Channel Configuration
- Jumper Selectable Voltage or Current Input/Output
- Configurable Power-on and Safe Value Settings
- Compatible with IEEE 802.11b/g standards
- Support WEP, WPA and WPA2 wireless encryption
- Support Modbus/TCP and UDP protocols
- Support DHCP network configuration
- Support DO/AO power on value & safe value mechanism
- Overload and Short Circuit Protection for Digital Output
- 240 Vrms Overvoltage Protection for Voltage Input
- ±4 kV Contact ESD Protection
- Built-in Watchdog
The WF-2026 is a multifunction module with Wi-Fi interface that has 5 analog input channels, 2 analog output channels, 2 digital input channels and 3 digital output channels. It provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA or 0 ~ +20 mA) and output range on all analog output (12-bit at +/-5 V, +/-10 V, 0 ~ +20 mA or +4 ~ +20 mA). Each analog input and output channel can be configured for an individual range and provides a high overvoltage protection of 240 Vrms. Analog Input and output are jumper selectable as either voltage or current.
With the popularity of 802.11 networks, the WF-2026 makes an easy way to incorporate wireless connectivity into monitoring and control systems. The WF-2026 also supports Modbus/TCP and UDP protocols and the network encryption configuration, which makes perfect integration to SCADA software and offer easy and safe access for users from anytime and anywhere.
Analog Input |
Channels |
5 (Differential) |
Input Range |
Voltage : ±150 mVDC, ±500 mVDC, ±1 VDC, ±5 VDC, ±10 VDC |
Current : 0 ~ +20 mA, +4 ~ +20 mA, ±20 mA (Jumper Selectable) |
Resolution |
16 bit |
Accuracy |
±0.1% FSR |
Sample Rating |
10 Hz (Total) |
Zero Drift |
±20 μV/°C |
Span Drift |
±25 ppm/°C |
Common Mode Rejection |
86 dB Min. |
Normal Mode Rejection |
100 dB |
Input Impedence |
Voltage |
2 MΩ |
Current |
140 Ω |
Overvoltage Protection |
240 Vrms |
Overcurrent Protection |
Yes, 50 mA @ 110 VDC |
Individual Channel Configuration |
Yes |
Analog Output |
Channels |
2 |
Output Range |
Voltage |
+0 ~ +5 VDC, +0 ~ +10 VDC, ±5 VDC, ±10 VDC |
Current |
+0 ~ +20 mA, +4 ~ +20 mA (Jumper Selectable) |
Resolution |
12 bit |
Accuracy |
±0.1% FSR |
Output Capacity Voltage Output Capacity |
10 VDC @ 20 mA |
Power-on Value |
Yes, Programmable |
Safe Value |
Yes, Programmable |
Digital Input |
Channels |
2 |
Input Type |
Dry Contact: Source |
Dry Contact Level |
Off Voltage Level: Open |
On Voltage Level: Close to GND |
Photo-Isolation |
3750 VDC |
Digital Output |
Channels |
3, Sink(NPN) |
Output Voltage |
+3.5 VDC ~ +50 VDC |
Output Current |
700mA per channel |
Intra-module Isolation, Field-to-Logic |
3750 VDC |
Overvoltage Protection |
60 VDC |
Short-circuit Protection |
Yes |
Power-on Value |
Yes, Programmable |
Safe Value |
Yes, Programmable |
Wifi-Interface |
Antenna |
5 dBi (Omni-Directional) |
Output Power |
8 dBm @ 11Mbps |
Receive Sensitivity |
-83 dBm @ 11Mbps |
Standard Supported |
IEEE 802.11b/g |
Wireless Mode |
Infrastructure & Ad-hoc |
Encyption |
WEP, WPA and WPA2 |
Transmission Range |
50 meters (LOS) |
Isolation |
Intra-module Isolation, Field-to-Logic |
3000 VDC |
Power |
Input Voltage Range |
10 ~ 30 VDC |
Power Consumption |
2.2W |
Mechanism |
Installatin |
DIN-Rail |
Dimensions (W x L x H) |
33mm x106mm x 120mm |
Environmental |
Operating Temperature |
-25°C; ~ +75°C (-13°F ~ +167°F) |
Storage Temperature |
-30°C ~ +80°C (-22°F ~ +176°F) |
Humidity |
10 ~ 90% RH, non-condensing |
|
|