|
|
WDT-02 - WDT-01 without daughter board, display, temperature sensor and relay by ICP DAS
|
|
|
Intelligent Watchdog Timer Card with toolkit for Windows DOS/95/98/NT/2000/XP and drivers for Linux
|
|
|
The WDT-01 is a watchdog card that provides a watchdog timer, a temperature monitor and power monitor functions. It also provides many signals and mechanisms such as: relay control, reset signal, and a power-good signal. The power-good signal allows users to control their system as soon as errors occur. There are many signals such as: IRQ, I/O status RS-232, LED, and Buzzer. These signals alert users and operators that errors have occurred. Once the WDT-01 has been powered on, it will monitor the power and the temperature of the PC automatically. The WDT-01 monitors the operations of software and hardware after the software enables the watchdog timer. The WDT-02 is an economical version of WDT-01.
- Watchdog timer:
- Software programmable
- from 0.01 second to 167772.15 seconds
- Temperature Monitor:
- Temperature:0°C - 75°C;
- Precision: +-1°C; onbord 2 digital LED display; Warming temperature
- Setting: 50°C, 60°C, 70°C or none.
- Computer power monitor:
- PC Power +5V,External Power +12V
- RS-232 output: speed: 9600, 4800, 2400 or 1200bps
- Transmit Message Includes:
- watchdog timer state
- Temperature status
- Current Temperature scale
- External & PC power status...etc.
- Power Required:
- 1.External power:+12V, 3W or
- 2.Internal power:+12V, 3W
- Printer-like I/O interface:
- LPT0(3bch)
- LPT1(378h)
- LPT(278h)
- or User Defined, only need 3 I/O ports
Signal/Function |
WDT timeout |
Over Temperature |
Power failure |
Reset |
Yes |
|
|
IRQ |
Yes |
Yes |
|
I/O status |
Yes |
Yes |
Yes |
RELAY |
Yes |
Yes |
|
TTL |
Yes |
Yes |
|
LED |
Yes |
Yes |
Yes |
ES232 |
Yes |
Yes |
Yes |
Buzzer |
Yes |
Yes |
Yes |
WDT / Watchdog
- power failure LED display only on terminal board.
- IRQ: 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15
- 4 BIT TTL output:
- logic high: 2.4VDC min, source 400uA.
- logic low: 0.5VDC max, sink-10mA
- Two Relay for watchdog or temperature failure:
- Contacts: FoRM c.
- Max switched current: 1A 30V/DC
- Max switched voltage: 120VAC/60VDC
- Max carry current : 1.25AC/DC
Output Signals |
WDT-01 |
WDT-02 |
Software driver |
Yes |
Yes |
on-board 7-seg LED |
Yes |
No |
Temperature measurement |
Yes |
No |
on board buzzer |
Yes |
No |
Relay output for watchdog alarm |
Yes |
No |
Relay output for temperature alarm |
Yes |
No |
Teminal board |
Yes |
No |
Other |
Yes |
Yes |
|
|