|
|
|
Advantech EKI-2541MI-AE - Ethernet to MM Fiber Media converter(wide temp.)
by Advantech
|
|
|
|
- Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
- Provides 1 x 100 Mbps Multi-mode/Single-mode SC type fiber port
- Provides internal jumper for Link Fault Pass-through (LFP) setting
- Supports full/half duplex flow control
- Supports store and forward transmission
- Supports Auto-negotiation
- Supports MDI/MDI-X auto-crossover
- Supports redundant 12-48 VDC power input
- Provides flexible mounting: DIN-rail and Panel mount
- Supports wide operating temperatures from -40 to 75°C (EKI-2541MI/SI)
| Mfg SKU # : | EKI-2541MI-AE |
|
|
|
The EKI-2541M/2541S is designed to convert Ethernet networks to fiber networks by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmissions.Therefore, the EKI-2541M/2541S is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-2541M/2541S supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Furthermore, the EKI-2541M/2541S can work normally from -10 to 60°C and accepts a wide voltage range from 12 ~ 48 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.
Link Fault Pass-Through (LFP)
The EKI-2541M/2541S is an enhanced Ethernet to fiber-optic converter. Aside from its standard features, the versatile the EKI-2541M/2541S also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the internal jumper to enable the LFP function, then the EKI-2541M/2541S will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
COMMUNICATIONS |
Standards |
IEEE 802.3, 802.3u, 802.3x |
LAN |
10/100Base-T (X), 100Base-FX |
Transmission Distance |
Ethernet: Up to 100 m Fiber: Multi-mode: up to 2 km Fiber: Single-mode: up to 30 km |
Transmission Speed |
Up to 100 Mbps |
Optical Fiber
Multi-mode |
Wavelength: 1310 nm
Tx Power: -14/-20 dBm
Rx Sensitivity: -31 dBm
Parameters: 50/125 um,62.5/125 um |
INTERFACE |
Connectors |
1 x RJ45
1 x SC type fiber connector
6-pin removable screw terminal (power) |
DIP Switch |
Port/Power Alarm, LFP
Fiber: HDX/FDX, Converter/Switch |
LED Indicators |
P1, P2, P-Fail
Ethernet: 10/100 m, LNK/ACT
Fiber: HDX/FDX, LNK/ACT |
Hardware Properties |
POWER |
Power Consumption |
Max. 2.7 W |
Power Input |
12 ~ 48 VDC, redundant dual inputs |
MECHANISM |
Dimension (WxHxD) |
37 x 140 x 95 mm (1.46" x 5.51" x 3.74") |
Mounting |
DIN-rail, Wall |
Enclosure |
IP30, Metal shell with solid mounting |
Protection |
Power Reverse |
Present |
Overload current |
Present |
ENVIRONMENT |
Operating Temperature |
-10 ~ 60°C (14 ~ 140°F) |
Wide Temp. model |
-40 ~ 75°C (-40 ~ 167°F) |
Storage Temperature |
-40 ~ 85°C (-40 ~ 185°F) |
Operating Humidity |
5 ~ 95% (non-condensing) |
Storage Humidity |
0 ~ 95% (non-condensing) |
MTBF |
577,175 hours |
CERTIFICATIONS |
Safety |
UL 60950-1, CAN/CSA-C22.2 No.60950 |
EMI |
FCC Part 15 Subpart B Class A, EN 55022 Class A |
EMS |
EN 61000-4-2
EN 61000-4-3
N 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8 |
Shock |
IEC 60068-2-27 |
Freefall |
IEC 60068-2-32 |
Vibration |
IEC 60068-2-6 |
|
|
|
|
