|
|
|
Patton CL-2386R/DC - CopperLink Long Range Hybrid Copper-Fiber Ethernet Extender. Six (6) RJ-45 local Ethernet LAN Ports
by PATTON
|
|
|
|
- Copper and Fiber - Extends Ethernet over copper or fiber cable plant. Allows copper extension spans
to switch and route onto fiber backbones. Enables redundant long-range copper and fiber rings.
- High Speed Transport - Achieves up to 15Mbps over 1 twisted pair. Symmetrical rates are
automatically adapted to the copper line conditions (noise environment, wire gauge/type and length).
- All Topologies - Supports point-to-point, multi-point, daisy-chain, and ring topologies.
- Long Range - Supports distances of 4 miles (6.5 km) for each span. The number of remote sites and
total distance is almost unlimited based on the bridging and repeating capabilities.
- QoS Traffic Prioritization - QoS Traffic Prioritization — Rate Limiting and Priority Queuing
functions enable prioritization of traffic types, such as time sensitive signaling or video streams.
IP/DSCP, VLAN 802.1Q, Priority Queuing.
- Packet Forwarding - A store and forward engine performs optimal packet forwarding, delivering the
lowest latency for end-to-end transfer.
- Cyber Secure - Firewall filtering, IPsec tunneling (with IKEv2 and Hub-and-Spoke functions), Simple
Certificate Enrollment Protocol (SCEP), X.509 authentication and PKI enrolment.
- Ethernet & Digital I/O - Ethernet plus Digital Input and Output Extension, Distribution and
Routing. Six (6) RJ-45 local Ethernet LAN Ports, Two (2) gigabit Ethernet WAN SFPs, plus digital input, and
output contacts. Dual Local + Remote / North + South Long-Range Copper Extension Ports.
- Configuration & Management - via local USB port (Host/Device), via SSH, HTTP, HTTPS, SNMP, FTP
and intuitive Web User Interface.
Ruggedized - Built into sturdy metal enclosure offering operating temperatures from -20 to +60°C,
without fans, so it works in industrial environments with hot, cold, or humid conditions.
Flexible Mounting - It comes with DIN rail mounting kit for panel builds and can also be installed
in a 19” rack.
|
|
|
The CL2386R/DC is an Ethernet Extender, Switch and Router that delivers high speed connectivity for
Ethernet-over-Copper, Fiber or both. Offering 8 Ethernet Ports including 6 LAN and 2 SFP WAN ports together with
Northbound and Southbound facing Long-Range Extension ports, the CL2380R is ideal for integrating local
copper-based industrial ethernet to regional fiber backbones.
The unit offers six (6) RJ-45 local Ethernet LAN Ports, two (2) gigabit Ethernet WAN SFPs ports, two
(local/remote, north/south) long-range copper extension ports, plus digital input, and digital output ports for
controlling industrial devices, sensors, alarms, or controls.
As a combination Ethernet Extender, Ethernet Switch and Ethernet Router, the units offer Layer 3 capabilities
supporting IP protocols required for routing, management and security required for critical industrial
infrastructure.
A special relay switch between the two Copper Extension ports (local/remote, north/south) enables the unit to be
bypassed (directly connects the copper lines) if the unit is shut down.
A Digital Output interface is used as an Alarm Relay indicating the power status of the unit. When the unit is
powered OFF, this relay is closed (Alarm mode) and when the unit power is ON, this relay is open. Digital Inputs
support dry-contact mode, where the absence of voltage corresponds to zero (o) and a voltage of 5V to 15V DC
corresponds to 1. The Digital Input can be used for a variety of purposes subject to future or customized
firmware releases.
Security is enhanced with a laundry list of cyber features including firewall filtering, IPSec tunneling (with
IKEv2 and Hub-and-Spoke functions), Simple Certificate Enrollment Protocol (SCEP), X.509 authentication and PKI
enrolment. It embeds a Secure-Element for enhanced authentication certificate control, strong encryption of
stored information and Secure-Boot to ensure total security of both data and software.
| Copper Transport Interfaces |
Two RJ-45 (120 Ohms) Composite Line Interfaces. Local and Remote (for Point to
Point) and Eastbound and Westbound for other topologies. Supports line rates from 192 kbps to 15.4
Mbps.
|
| Ethernet Backbone Interfaces |
2x Gigabit Ethernet SFP receptacles (Ethernet WAN) for short haul multi-mode or
long-haul singlemode fiber SFPs.
|
| Local Ethernet Interfaces |
6x 10/100 RJ-45 Copper Ethernet ports (Ethernet LAN). MDI/MDIX automatic
detection. 16K MAC address memory and 2 MB Ethernet frame buffer.
|
| Switching and Traffic Control |
Supports IPv4, IPv6, Static Routing, GRE, IPSec VPN with Ike v2, Hub-and-Spoke,
DHCP, and DNS. 802.1p, VLAN/DSCP, rate limiting QoS, 802.1X Authentication, 802.1Q, per port VLANs,
802.1ab LLDP, STP, RSTP, 802.1D Resiliency and 1,524 bytes frame size.
|
| Digital I/O |
1x digital input and 1x dry contact relay output 48Vdc/0.1A max.
|
| Distances |
Based on no noise conditions using AWG26/0.4mm (See Table).
|
| USB Host Port |
Local console port for Configuration and firmware updates. CLI, web server,
memory card for configuration backup and firmware updates, event log memory.
|
| LED Indicators |
Power (administration in progress). Composite Line synchronization (2). Link/Act
connection and traffic activity on the Ethernet interfaces (2). Ethernet interface speed (2). TD/RD
data transmission on the serial interface (1).
|
| Configuration & Management |
CLI, HTTP, SSH, HTTPS, FTP, Web GUI. Command Line via SSH and local USB console
port. Dying Gasp. SNMP V1, V2, V3. Radius (web and SSH authentication), LLDP, SCEP, X509 certificate
management.
|
| Security |
SecureBoot (secure element with strong encryption of stored data).
|
| Diagnostics |
Syslog, Ping and traceroute interface and protocol diagnostics.
|
| Power Input |
2x power inputs. 12/24 or 24/48 VDC.
|
| Environmental |
Metal enclosure with Desktop, DIN rail and 19” mounting options. IP-40 Protection
(like NEMA 1)
|
| Physical |
Dimensions 280 x 150 x 70 mm. Weight : 1.3 kg
|
| Temperature |
Operating: -20 to +60 °C, fan less. Relative Humidity: 90% non-condensing.
|
| |
19 AWB |
26 AWB |
| Line Rate |
Meters |
Miles/Feet |
Meters |
Miles/Feet |
| 320 Kbps |
11 Km |
6.83 mi |
5.0 Km |
3.1 mi |
| 576 Kbps |
9.3 Km |
5.77 mi |
4.0 Km |
2.48 mi |
| 1920 Kbps |
7.6 Km |
4.72 mi |
3.3 Km |
2 mi |
| 2304 Kbps |
6.9 Km |
4.28 mi |
3.0 Km |
1.86 mi |
| 3328 Kbps |
5.9 Km |
3.66 mi |
2.55 Km |
1.58 mi |
| 4800 Kbps |
4.8 Km |
2.98 mi |
2.10 Km |
1.3 mi |
| 8768 Kbps |
3.6 Km |
2.23 mi |
1.12 Km |
0.5 mi |
| 11,770 Kbps |
2.3 Km |
1.42 mi |
525 m |
1722 ft |
| 13,800 Kbps |
1.4 Km |
0.86 mi |
450 m |
1476 ft |
| 14,200 Kbps |
600 m |
1968 ft |
300 m |
984 ft |
| 14,700 Kbps |
350 m |
1148 ft |
225 m |
738 ft |
| 15,300 Kbps |
225 m |
738 ft |
150 m |
492 ft |
|
|
|
|
