|
|
|
CL1101E/PAFA/TB/EUI-2PK - Industrial CopperLink PoE Extender Kit; 1x 10/100; 802.3af (mode A); 2 Position Terminal Block; Line P
by PATTON
|
|
|
|
- Ethernet Extension—Extends 10/100Base-TX Ethernet over 3,300 feet (1005 meters) using 2-wire, 24-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable.
- Delivers PoE—PowerPlus technology powers up both the remote CopperLink extender and the PoE enabled device connected to it. No power is required at the remote location.
- Transparent LAN Bridging—Will pass higher layer industrial Ethernet protocols such as BACnetIP, EtherCAT and Modbus TCP.
- Plug and Play—Modems need no configuration to operate, Ethernet ports are auto-sensing 10/100, full or half-duplex.
- Overvoltage Protection—Overvoltage protection on Line and Ethernet ports prevents damage from ESD (electrostatic discharge), CDE (cable discharge events), and lightning.
- Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
|
|
|
The Patton Model CL1101E-PAFA-TB-EUI-2PK enables Ethernet connectivity over previously installed copper infrastructure. The solution breathes new life into circuits previously deployed for such traditional non-IP applications as RS232/485 HVAC and building automation controls, alarms, CCTV, analog phones, intercom speakers, and others.
Instantaneously install PoE-capable devices such as wireless access points (WAPs), IP cameras, IP telephones, IP door stations, HVAC controls, LED lighting and more—with no additional overhead cost. With the extended reach the CL1101E kit provides, you can install your IP terminal equipment exactly where you want it! Flexibility of device location is paramount in such applications as building security, where increased perimeter dimension and expanded spot coverage area are critical.
| Line Interfaces (Data) |
- 1 x RJ45 (Optional: Terminal Block, Coax)
- Supports 1-4 pairs
|
| Ethernet Interfaces |
- 1 x RJ45 Auto-Sensing 10/100Base-TX with full or half-duplex operation
|
| LEDs |
- Power, Line, (10 or 100 operation), Eth, and PoE
|
| Protocol |
- Transparent to high layer Industrial Ethernet protocols such as EtherCAT, Modbus-TCP, PROFINET and more.
- Supports 802.1Q VLAN tagged frames
- Transparent to IP video schemes
- Fully transparent to compression schemes such as WMV, MPEG-4, and MJPEG
|
| Overvoltage Protection (Line and Ethernet) |
- IEC 61000-4-2 (ESD) 25kV (air), 15kV (contact)
- IEC 61000-4-4 (EFT) 40A (5/50ns)
- IEC 61000-4-5 (lightning) 25A (8/20μs)
|
| Power Injection (PSE only) |
- DC voltage on Ethernet port
- 54 VDC
|
| Power Consumption |
|
| Power Supply |
- External AC Adapter 100–240 VAC to 54 VDC
- Input: 30–57 VDC (Recommended 54 VDC)
|
| MTBF |
|
| Environment |
- Temperature: -10 to 70°C
- Humidity: 10 to 95% (non-condensing)
|
| Physical |
- 1.19 W x 4.28 H x 3.36 D in. (30.2 W x 108.7 H x 85.3 D mm)
- 0.78 oz (22 g)
|
| Compliance |
- FCC Part 15A, Class B
- CE Mark
- EMC Directive 89/336/EEC
- LVD Directive 73/23/EEC
|
|
|
