|
|
|
CL1314MDE/EUI - Ruggedized 5.7 Mbps CopperLink Multi-Drop Ethernet Extender; 2 x CopperLink; 4 x10/100; -40 to 85C; 100-240VAC
by PATTON
|
|
|
|
- High Speed Extension—Achieve up to 15.3 Mbps over 1 (2-wire) pair or 30 Mbps over 2 (4-wire) pairs.
- Flexible Uses—Can be used as a long distance Ethernet extension (repeater) and/or in Multi Drop Ethernet applications.
- Multi-rate Selection—Just plug the units in and select the ideal user-configurable rate for your application.
- CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-45 ports.
- Extended Temperature— -40 to 85°C operation.
- Ruggedized—Operating temperature of -40 to 85°C and optional conformal coating to protect against condensing humidity and corrosion.
- Transparent LAN Bridging—Transparently pass higher-layer protocols with support for 802.1Q VLAN tagging.
- Automatic Learning, Aging, and Filtering—Keeps local traffic local, ensuring efficient utilization of the long-range link.
- Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility.
|
|
|
The Patton Model CL1314MDE-EUI Multi-Drop Ethernet Extender used in conjunction with the CL1314R makes Ethernet extension a breeze. The MDE series of Ethernet Extenders allows users to replace their legacy serial coms with cost-effective Ethernet (IP) that is easy and inexpensive to set up. Featuring plug-and-play installation, the CL1314 MDE leverages existing copper twisted-pair infrastructure to interconnect Ethernet devices and networks at moderate speeds over long distances. The MDE Extender not only allows multi-drop functionality but also serves a repeater function doubling your maximum distance at every hop.
Operating over standard 0.5 mm (24 AWG) voice-grade wiring, the CL1314MDE delivers speeds up to 15.3 Mbps and extends Ethernet connections across distances up to 10 km (6.2 miles) per hop. Whether you need connect to a remote offices, kiosks, guard stations, train stations, digital sensors or IP cameras—Patton Ethernet Extenders offer the industry’s optimum combination of speed and distance. Patton’s CopperLink Ethernet Extenders ensure hassle-free set-up and operation, while achieving the highest possible line rate for the required distance and electro-magnetic environment. Users can “hard-set” the desired line rate via DIP switch, GUI or console Telnet.
Operating at layer 2 of the OSI model (data link layer), the CL1314MDE transparently passes all higher-layer protocols—including VLAN tagging, multicast addressing, VPN pass-through for IPsec, and all IP-video compression schemes. All common industrial protocols are also transparently supported, including MODBUS/TCP and PROFINET IO.
| Protocol |
Transparent to higher layer protocols |
| Transmission Line |
1 (2-wire) pair or 2 (4-wire) pairs |
| Line Rates |
Rates from 192 kbps to 15.3 Mbps, selectable in all 64 kbps increments up to 15.3 Mbps |
| Front Panel LED Status Indicators |
WAN: Link, LAN (Ethernet): Link/Act, Power |
| Line Coding |
TC-PAM 16 for rates of 192 kbps to 2.3 Mbps • TC-PAM 32 for rates above 2.3 Mbps • TC-PAM 64 for rates above 5.7 Mbps • TC-PAM 128 for rates above 11 Mbps |
| Connectors |
2 x RJ-45 on copper line side and 4 x 10/100 Ethernet
|
| Line Interface |
Transformer coupled, 1500 VAC isolation |
| Management |
DIP switch • HTTP • NTP • SNMPv3 • SYSLOG Client • CLI (Telnet, SSH, Console Port) • TFTP firmware upgrade • Import/export config • Patton Cloud • restAPI |
| Ethernet Protocols |
Transparent bridging (IEEE 802.1D) • VLAN based QOS (802.1P/Q) • ARP • DHCP Client/Server • STP • DNS Server/Relay |
| MTBF |
4.7 years |
| Power |
External 90–260 VAC, 50–60 Hz (Universal Input) via Terminal Block
(Optional) Internal +12 to +48VDC (10-52VDC) via 3 position, terminal block |
| Operating Temp. |
-40 to 185°F (-40 to 85°C) |
| Humidity |
5 to 95%, non-condensing (CC option 85% condensing) |
| Altitude |
0 to 15,000 ft (0 to 4,600 m) |
| Enclosure |
Aluminum (designed to meet IP40) |
| Dimensions |
2.25W x 5.62H x 4.66D in. (5.7W x 14.27H x 11.83D mm)
PCB: 4 X 4.9 in. (10.6 x 12.4 cm) |
| Weight |
0.7 lbs (0.3 kg) |
| Compliance |
FCC Part 15A • CE Mark per EMC directive 89/336/EEC • Low Voltage Directive 73/23/EEC |
|
|
