| Model |
| Standards |
IEEE 802.3, 802.3u, 802.3x |
| Processing Type |
Store & forward; wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
1.4 Gbps |
| Frame Buffer Memory |
256 Kbit |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Interface |
| RJ-45 port |
10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Fiber Port |
100 Base-FX |
| LED Indicators |
10/100M, Link/Act, Full duplex/Half duplex (Fiber Port) |
| Ethernet Isolation |
1500 Vrms 1 minute |
| Multi Mode |
Multi mode fiber cables |
50/125, 62.5/125 or 100/140 μm- |
| Distance |
2 km, (62.5/125 μm recommended) for full duplex- |
| Wavelength |
1300 or 1310nm- |
| Min. TX Output |
-20 dBm |
| Max. TX Output |
-14 dBm |
| Max. RX Sensitivity |
-32 dBm |
| Max. RX Overlaod |
-8 dBm |
| Budget |
12 dBm |
| Single Mode |
Single-sode fiber cables |
|
| Distance |
|
| Wavelength |
|
| Min. TX Output |
|
| Max. TX Output |
|
| Max. RX Sensitivity |
|
| Max. RX Overload |
|
| Budget |
|
| Ethernet Transmission Distance |
Ethernet |
2-pair UTP/STP Cat.3, 4, 5, EIA/TIA-568 100 Ω |
| Fast Ethernet |
2-pair UTP/STP Cat. 5, EIA/TIA-568 100 Ω |
| Power |
| Input Voltage Range |
+12 VDC ~ +48 VDC (Non-isolation) |
| Power Consumption |
0.12 A @ 24 VDC |
| LED Indicator |
Yes |
| Protection |
Power reverse polarity protection |
| Frame Ground for EMS Protection |
Yes |
| Mechanical |
| Casing |
Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x D) |
33 mm x 85 mm x 107 mm |
| Installation |
DIN-Rail |
| Environmental |
| Operating Temperature |
-30°C ~ +75°C (-22°F ~ +167°F) |
| Storage Temperature |
-30°C ~ +85°C (-22°F ~ +185°F) |
| Ambient Relative Humidity |
10% ~ 90% RH, non-condensing |
