ICP DAS NS-200AFT - Discontinued - 1 Port Industrial 10/100 Base-T to 100 Base-FX Media Converter
by ICP DAS

Name: ICP DAS NS-200AFT - *Discontinued* - 1 Port Industrial 10/100 Base-T to 100 Base-FX Media Converter
Brand: iComTech
SKU: NS-200AFT
Price: 353.0 USD

Write a review

Industrial 10/100 Base-T to 100 Base-FX(SC/ST connectors, multi mode) Media Converter. Supports operating temperatures from -30 to 75°C

Mfg SKU # :

NS-200AFT

List Price :

$359.00

Our Price :

$353.00

Description
Specification
Datasheet

The NS-200AF series is an Ethernet (10/100Base-TX) to Fiber Optic (100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDI-X function.

The NS-200AF series is available in models that support an operating temperature of 0 to 70 °C, and an extended operating temperature of -30 to 75 °C

Features

Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x
Supports +12 ~ +48 VDC voltage
Supports operating temperatures range 0 °C ~ +70 °C
-30 to 75°C operating temperature range (T models)
DIN rail mount for industrial usage

Technology
Standards	IEEE802.3, 802.3u, 802.3x
Processing Type	Store & forward; wire speed switching
MAC Addresses	1024
Memory Bandwidth	1.4 Gbps
Interface
RJ45 port	10/100BaseT(X) auto negotiation speed, Full duplex mode, and auto MDI/MDI-X connection
Fiber port	100 Base-FX (SC/ST connectors)
LED Indicators	10/100M, Link/Act, Full duplex(Fiber Port)
Ethernet Isolation	1500 Vrms 1 minute
Frame Ground for EMS Protection	Yes
Multi Mode (NS-200AFT, NS-200AFT-T, NS-200AFC, NS-200AFC-T )	Multi mode fiber cables:50/125, 62.5/125 or 100/140 μm
	Distance :2 km, (62.5/125 μ mrecommended) for full duplex
	Wavelength : 1300 or 1310nm
	Min. TX Output:- 20 dBm
	Max. TX Output: -14 dBm
	RX Sensitivity: -34 to -31 dBm
Single Mode (NS-200AFCS, NS-200AFCS-T, NS-200AFCS-40T)	Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
	Distance: 15 km, (9/125 μm recommended) for full duplex
	Wavelength: 1300 or 1310nm
	Min. TX Output: - 15 dBm
	Max. TX Output: -8 dBm
	RX Sensitivity: -36 to -31 dBm
Ethernet Transmission distance	Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Ethernet Transmission distance	Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
Power
Input Voltage Range	+10 ~ +48 VDC (Non-isolation)
Power consumption	0.12 A @ 24 VDC, +/- 5% arrowed with 100M Full duplex
LED Indicator	Yes
Protection	Power reverse polarity protection
Frame Ground for EMS Protection	Yes
Mechanical
Case	Plastic (Flammability UL 94V-0)
Dimensions (W x H x D)	33mm x 107mm x 85mm
Installation	DIN rail mount
Environmental
Operating Temperature	0°C ~ +70°C(-30°C ~ +75°C with T models)
Storage Temperature	-30 ~ +85°C
Ambient Relative Humidity	10% ~ 90% RH, non-condensing