ICP DAS NS-200AFT-T - Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 multi mode, ST connector
by ICP DAS

The NS-200AF series is a Ethernet (10/100 Base-TX) to Media (100 Base-FX) converter. The Ethernet supports 10/100M auto negotiation feature and auto MDI/MDI-X function. NS-200A can work normally from -30 ~ 75°C and accepts a wide voltage range from +12 ~ 48 VDC.

Description
Specification
Datasheet

Automatic MDI/MDI-X crossover for plug-and-play
Supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
1.4 Gbps high performance memory bandwidth
Frame buffer memory: 256 Kbit
1024 MAC addresses
Supports +10 VDC ~ +30 VDC
Reverse Polarity Protection
Supports operating temperatures from -30 °C ~ +75 °C
Slim packaging fits on your DIN-Rail

Model
Standards		IEEE 802.3, 802.3u, 802.3x
Processing Type		Store & forward; wire speed switching
MAC Addresses		1024
Memory Bandwidth		1.4 Gbps
Frame Buffer Memory		256 Kbit
Flow Control		IEEE 802.3x flow control, back pressure flow control
Interface
RJ-45 port		10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Port		100 Base-FX
LED Indicators		10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ethernet Isolation		1500 Vrms 1 minute
Multi Mode	Multi mode fiber cables	50/125, 62.5/125 or 100/140 μm-
	Distance	2 km, (62.5/125 μm recommended) for full duplex-
	Wavelength	1300 or 1310nm-
	Min. TX Output	-20 dBm
	Max. TX Output	-14 dBm
	Max. RX Sensitivity	-32 dBm
	Max. RX Overlaod	-8 dBm
	Budget	12 dBm
Ethernet Transmission Distance	Ethernet	2-pair UTP/STP Cat.3, 4, 5, EIA/TIA-568 100 Ω
	Fast Ethernet	2-pair UTP/STP Cat. 5, EIA/TIA-568 100 Ω
Power
Input Voltage Range		+12 VDC ~ +48 VDC (Non-isolation)
Power Consumption		0.12 A @ 24 VDC
LED Indicator		Yes
Protection		Power reverse polarity protection
Frame Ground for EMS Protection		Yes
Mechanical
Casing		Plastic (Flammability UL 94V-0)
Dimensions (W x L x D)		33 mm x 85 mm x 107 mm
Installation		DIN-Rail
Environmental
Operating Temperature		-30°C ~ +75°C (-22°F ~ +167°F)
Storage Temperature		-30°C ~ +85°C (-22°F ~ +185°F)
Ambient Relative Humidity		10% ~ 90% RH, non-condensing