O ACADPTR)
by IMC

Write a review

10/100 MBPS MANAGED OPTICAL DEMARCATION COMPACT CPE DEVICE

Loopback troubleshooting
SNMP Manageable
Power options: AC, DC and 802.3af Power over Ethernet (PoE)
Bi-directional Bandwith control
MTU: Supports over-sized packets up to 1916
Supports passive 802.3ah OAM (Operation, Administration & Management

Mfg SKU # :

856-19767

List Price :

$910.00

Our Price :

$892.00

Description
Specification
Datasheet

The compact IE-MiniFiberLinX-II provides point-to-point fiber optic connections with a unique management tool to monitor the entire link between two locations. IE-MiniFiberLinX-II CPE for fiber optic networks allows service providers to deliver “triple-play” voice, video and data services to customer premises.

As a copper-to-fiber converter, the IE-MiniFiberLinX-II supports multiple fiber types including multi-mode, single-mode, single-strand fiber (SSF), and Course Wavelength Division Multiplexing (CWDM) functionality to increase the capacity of existing fiber. It allows for remote configuration, provides vital alerts to network administrators, and can manage the CPE and fiber link as a single entity.

Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter), the IE-MiniFiberLinX-II also offers multiple powering options: AC power (with included adapter), DC (through a 4-terminal power block), as well as Power over Ethernet, acting as a Powered Device (PD) to draw power when connected to 802.3af compliant Power Sourcing Equipment (PSE).

Combining copper-to-fiber conversion, extended temperature performance, plug-and-play operation, miniature size and multiple power options, the IE-MiniFiberLinX-II is one of the most versatile fiber optic CPE devices available.

General

Preserves complete end-to-end fiber connection integrity
Bi-directional bandwidth control (per port, per direction, per VLAN)
Read/write IEEE 802.1Q VLAN-tags
Extra Tagging with Q-in-Q mode (802.1p)
Supports passive 802.3ah OAM (Operation, Administration & Management)
QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority)
VLAN filtering up to 32 values
Layer 2 packet switching, store and forward operation
Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps
AutoCross for MDI/MDIX
Features Auto Negotiation and Selective Advertising
Supports Half and Full-Duplex operation
MTU: Supports over-sized packets up to 1916 bytes per packet
LFPT available through CLI configuration

Security

Password Control
Multiple Access Levels: User Assigned Accounts & Access Levels
Management
SNMP V1 and V2c compatible
Includes GUI-based iView² software for remote management and upgrades
Monitors far-end (remote) status without a physical presence or separate connection
IEEE 802.3x Flow Control
Includes DHCP and TFTP clients
Supports Telnet Includes loopback test modes (MAC swap)
Includes LinkLoss and FiberAlert
Remote capabilities with built-in support for UMA (IP-less management)
RS-232 capability for local management
Mini-jack cable for direct connection to a PC’s Serial Port included

Ethernet Types Supported

IEEE 802.3i 10Base-T twisted pair
IEEE 802.3u 100Base-TX twisted pair
IEEE 802.3u 100Base-FX or SX fiber

Fiber Types Supported

50/125μm or 62.5/125μm multi-mode fiber
9/125μm single-mode fiber
Single-strand fiber or CWDM

Connectors: RJ-45, and ST or SC

Environmental

Humidity:

5% - 95% (non-condensing)

Operating Temperature:

-49° to +185° F (-45° to +85° C) DC Telco
-13° to +167° F (-25° to +75° C) DC Adapter
+14° to +122° F (-10° to +50° C) AC Adapter

Power

AC Wall Adapter: 100 to 240 VAC ±10% input, 5 VDC output, 2A max.

DC Input Voltage: 12 to 48 VDC *, 1 to .02A, 7 to 50 VDC, 1 to 0.1A IEEE 802.3af Power over Ethernet

* Telco compatible -48 VDC allows for an absolute maximum voltage of 56.5 VDC.

IMC MIB:

Traps (Cold Start, Warm Start, Authentication Failure, Link Up, Link Down, Remote Unit Lost, Remote Unit Back Online, Far End TX Link On and Far End TX Link Off, Last Gasp)
Link Status of Ports
Port Type
Fiber Type
SNMP Port (Host/Remote)
SNMP Agent IP Address (Host/Remote/Single)
Link Partner
User-Definable Name of Product
User-Definable ID/Name of Ports
Enable/Disable Ports
Enable/Disable FiberAlert
Enable/Disable loopback modes
Set Duplex Mode for Twisted Pair Ports
Set Auto Negotiation/Speed for Twisted Pair Ports