|
|
855-19619 - ** DISCONTINUED ** IE-ModeConverter, SFP/SFP by IMC
|
|
|
- Interchangeable SFP modules allow for multiple fiber mode/type
conversion options (single-mode, multi-mode, long haul, short haul, etc.)
- Extended operating temperatures
- Multiple mounting options (Desktop, DIN Rail, IE-PowerTray/18-AC [for
high-density installations])
- Compact size conserves space
- AC or DC powering options
- Supports a full range of fiber SFP Modules in various transmission
speeds, from 10 Mbps
|
|
|
Mode converters allow network operators to incorporate multiple fiber types
within a network. The IE-ModeConverter provides the ability to accomplish
this by working with existing equipment and thus, eliminating replacement
costs. With the flexibility to convert fiber between single-mode,
multi-mode, single-strand and various wavelengths, one can easily extend
network range to reach more remote locations. Additionally, since the IE-ModeConverter
is an Industrial Equipment device (IE), the unit operates in environments
that demand extended operating temperatures.
The IE-ModeConverter uses SFP modules to provide greater fiber flexibility
in the network environment. The hot-swappable nature of the SFPs and the
numerous fiber modes and types available allow for easy configuration and
future upgrading as network demands evolve.
The SFP modules must be MSA compliant and support the same speed range. The
IE-ModeConverter operates as a mode converter only and not as a rate or
media converter.
Technical
-
Two SFP ports
-
Protocol-independent operation
-
Converts between dissimilar fiber modes and wavelengths
-
Includes diagnostic LEDs
-
Hot-swappable architecture
-
Small Form Factor
-
7 VDC to 50 VDC terminal block powering option
-
Supports an external 5 VDC power module (not extended temperature)
-
Extended temperature range from -10° to +50° C
-
Compatible with IMC Networks SFPs and all standard MSA compliant SFP
transceivers
-
Supports DIN Rail mounting
-
DC terminal block has dual inputs and supports cascading power
Standard Compliance
-
SFP-MSA SFP standard (September 14, 2000)
-
SFF-8472 DDMI standard (Revision 1.0)
Mechanical
-
Dimensions - 0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)
-
Shipping Weight 0.25 lbs (0.11 kg)
Ac wall adapter
-
100 to240 ±10% VAC input, 5 VDC output, 2A max.
DC Input Voltage
-
+7 to +50 VDC @ 2.5 Watts (chassis grounded to negative terminal)
Power
-
Maximum 3.3 Watts of combined power to both SFPs
Environmental
-
Operating Temperature:
-13°F to +185°F (-25°C to +85°C) DC configuration
-4°F to +158°F (-20°C to +70°C) DIN Railmount power supply
+14°F to +122°F (-10°C to +50°C) with AC wall adapter
-
Storage Temperature: -49°F to +185°F (-45°C to +85°C)
-
Operating Humidity 5% to 95% (non-condensing), 0 – 10,000 ft. altitude
Regulatory Approvals
-
FCC Class A
-
UL/cUL, CSA, CE
|
|