1.800.301.9097
COVID-19 Response: a note to our customers. 
We're here to help.Learn More>

Login / Register Contact Us
 
Home Media Converters Modular Ethernet Media Converter & Extender MCR Ethernet Media Converter Modules 10 Gigabit Media Converter Modules for MRC Systems
05061560 C-10GT-XFPH - 10 Gigabit Ethernet Media Converter Module. 10GBASE-T (RJ-45) [100 m/328 ft.] (CAT6A or better ) to fiber by PERLE

05061560 C-10GT-XFPH - 10 Gigabit Ethernet Media Converter Module. 10GBASE-T (RJ-45) [100 m/328 ft.] (CAT6A or better ) to fiber
by PERLE

Write a review
  • Support for Power Level 1,2,3 as well as high-power Level 4 XFPs
  • Optical signal regeneration: 3R (re-amplify, reshape, and retime)
  • XFP slot (empty)
  • Mfg SKU # : 05061560
    List Price : $1,009.00
    Our Price : $858.00
    In Stock :Call for Availability
    Quantity :

    Installed in a high density MCR1900 Media Converter Chassis, Perle C-10GT Media Converter Modules transparently connect 10GBase-T Ethernet links over multimode or single mode fiber. Each 10GbE Media Converter comes with one RJ45 10GBase-T port and an empty slot for one SFP+ or XFP module.

    Copper to Fiber conversion is achieved by inserting XFP or SFP+ fiber transceivers that support multimode and single-mode fiber, including CWDM/DWDM wavelengths. Copper to copper is achieved by inserting SFP+ Direct Attach Cable (DAC), also known as twinax, or XFP 10Gbase-CX4 transceivers.

    The empty transceiver ports on the C-10GT Media Converter Modules allow for flexible network configurations to meet any requirement using a variety of 10G transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFP+ and XFPs. You can use these products to convert:

    • 10GBase-T (RJ45) to SFP+
    • 10GBase-T (RJ45) to XFP
    • 1000Base-T (RJ45) to 1000Base-X (SFP)
    • 10GBase-T (RJ45) to Direct Attach DAC copper twinax (SFP+)
    • 10GBase-T (RJ45) to 10GBase-CX4 (XFP)

    Perle 10 Gigabit Ethernet to Fiber Converters provide an economical path to extend the distance of an existing 10GbE link. Network Administrators can “see-everything” with Perle’s advanced features such as Smart Link Pass-Through, Fiber Fault Alert, a built-in Link Test capability and Loopback. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make C-10GT Media Converter Modules the smart choice for IT professionals.

    C-10GT Media Converter Features

    Smart Link Pass-Through When Smart Link Pass-Through is enabled (default), each port will reflect the state of its port peer. In this mode, if a link loss is detected on one port, the transmit signal on the other port is disabled “passing through” the state of the failed link. This enables managed switches and other devices to report link failures to their network NMS.

    When Smart Link Pass-Through is disabled, if a link loss is detected on one port the transmit signal remains enabled on the other port.
    Fiber Fault Alert With Fiber Fault Alert the state of the 10 Gigabit Ethernet receiver is passed to the transmitter. This provides fault notification to the partner device attached to the 10G Ethernet interface of the media converter.
    Green Ethernet Utilizes Green Ethernet energy saving technology based on industry standards such as:
    • Short Reach Mode (less than 30 meters) as per IEEE 802.3an. This enables 10GBase-T operation with less power consumption.
    • Energy Efficient Ethernet (EEE) as per 802.3az. This provides power savings during idle network activity.
    Built-in Link Test When enabled, the built-in packet generator transmits Ethernet test frames to its 10 Gigabit Ethernet peer. The remote media converter will auto-detect the test frames and loopback the test frames. Any frames received in error, will cause the Power, LK1 and LK2 LEDs to illuminate in a specific combination to identify the error. During the test different bit test patterns will be utilized every 5 seconds ensuring a thorough link test.
    Test Mode Auto-detect When enabled through the management interface, the remote media converter will enter test mode automatically when requested by its central site peer. This virtually eliminates unnecessary truck rolls to a remote site when diagnosing a link failure.
    EDC Mode Control Electronic Dispersion Compensation (EDC) is an algorithmic method used to compensate for optical dispersion that occurs on high speed 10 Gigabit links. EDC mode settings are automatically configured by the media converter based on the information retrieved from the SFP+ module. This will enable proper operation for extended multimode 10GBase-LRM as well as active or passive copper cabling.
    Module Temperature Protection Protects your DOM/DMI capable SFP+ or XFP module by monitoring its internal temperature and will automatically shut down the XFP or SFP if the module is operating above its maximum temperature threshold.
    High Power Level 4 XFPs High powered Level 4 XFPs are supported.
    Gigabit SFP support The 10 Gigabit media converter model with the SFP+ slot can also support Gigabit (1000Base-X) SFPs. This allows users to use Gigabit SFPs today and migrate to 10G SFP+ in the future.
    Jumbo Packets Transparent to jumbo packets.
    VLAN Transparent to VLAN tagged packets.
    Remote Loopback Capable of performing a loopback on the 10 Gigabit interface. In this mode, all frames received on the port in loopback mode will be transmitted back. This provides users with the capability of utilizing their own in-house test generators for testing the link.
    Power 10GT to SFP 10GT to XFP
    Maximum Power Consumption (watts) 10* 15*
    Indicators
    Power / TST
    • On: Power indication and in normal operation
    • Blinking slowly: the unit is in loopback or test mode (either port)
    • Red solid: the unit has a hardware error (upon power up)
    • Red and blinking: the unit has a hardware error specified by combination of LK1 and LK2
    LK1 (SFP/XFP)
    • On: Link present
    • Blinking quickly: Fiber link present and receiving data.(including test data)
    • Blinking slowly: Fiber link disabled because the other fiber link went down.
    • Blinking 1 sec on 3 sec off – module shut down due to high temperature.
    • Off: No fiber link present or no module inserted
    LK2
    • On: 10GBase-T link present
    • Blinking quickly: Link present and receiving data
    • Blinking slowly: Link disabled because Link 1 went down
    • Off: 10GBase-T link is not active
    Switches
    Link Mode When the Link Mode is enabled (default), each port will reflect the state of its port peer using Smart Link Pass-Through. In this mode, if a link loss is detected on one port, the transmit signal on the other port is disabled “passing through” the state of the failed link. This enables managed switches and other devices to report link failures to their network NMS.

    When the switch is in the down position, Smart Link Pass-Through is disabled. If a link loss is detected on one port, the transmit signal remains enabled on the other port.

    Fiber Fault Alert Enabled (Default - Up)
    With Fiber Fault Alert the state of the 10 Gigabit ethernet receiver is passed to the transmitter. This provides fault notification to the partner device attached to the 10G ethernet interface of the media converter

    Disabled (Down)

    Test Mode Through the use of three dip switches the unit, and its peer, can be placed into a link test mode which will verify the integrity of the link through the use of its built-in link test generator. The unit can also be placed into a simple line loopback.
    EEE Green Ethernet When enabled (default), the media converter will operate as an IEEE 802.3az Energy Efficient Ethernet (EEE) compliant device.
    Loopback Capable of performing a loopback on the 10 Gigabit interface. In this mode, all frames received on the port in loopback mode will be transmitted back. This provides users with the capability of utilizing their own in-house test generators for testing the link.
    Connectors 10GT to SFP 10GT to XFP
    10GBase-T (RJ45) IEEE 802.3an
    100 meters on CAT6A or better
    IEEE 802.3an
    100 meters on CAT6A or better
    Pluggable 10G Fiber Transceiver slot ( Hot insertion and removable) 10 Gigabit SFP+ Slot
    • Power level 1, 2
    10 Gigabit XFP Slot
    • Power level 1,2,3
    Voltages supplied to XFP slots - 1.8V, 3.3V, 5V and -5.2V
    Supported 10 Gigabit Fiber pluggable transceivers IEEE 802.3ae compliant:
    • 10GBase-SR
    • 10GBase-LRM
    • 10GBase-LR
    • 10GBase-ER
    • 10GBase-ZR
    CWDM/DWDM
    IEEE 802.3ae compliant:
    • 10GBase-SR
    • 10GBase-LRM
    • 10GBase-LR
    • 10GBase-ER
    • 10GBase-ZR
    CWDM/DWDM
    Supported 10 Gigabit Copper pluggable transceivers SFP+ Direct Attach Cable (DAC). Also known as:
    • Twinax
    • 10GBase-CU
    • 10GSFP+Cu
    • 10GBase-CX1
    • 10GBase-CR1
    Note: Passive and Active cable types supported
    IEEE 802.3ak compliant:
    • XFP 10GBase-CX4 copper
    Supported Gigabit Fiber SFPs 1000Base-SX

    1000Base-LX/LH

    1000Base-BX

    CWDM/DWDM

    Note: the RJ45 interface will auto-negotiate to 1000Base-T ( Gigabit )

    N/A
    Chassis Slot profile Two slots Two slots
    Environmental Specifications 10GT to SFP 10GT to XFP
    Operating Temperature 0° C to 50° C (32° F to 122° F)
    Storage Temperature minimum range of -25° C to 70° C (-13° F to 158° F)
    Operating Humidity 5% to 90% non-condensing
    Storage Humidity 5% to 95% non-condensing
    Operating Altitude Up to 3,048 meters (10,000 feet)
    Heat Output
    ( BTU/HR )
    34 51
    MTBF (Hours)** 261,388 286,082
    Packaging
    Shipping Weight 0.25 kg, 0.55 lbs
    Shipping Dimensions 170 x 260 x 70 mm, 6.7 x 10.2 x 2.8 inches
    Regulatory Approvals
    Emissions FCC Part 15 Class A, EN55022 Class A
    CISPR 22 Class A
    EN61000-3-2
    Immunity EN55024
    Electrical Safety UL 60950-1
    EN60950
    CE
    Environmental Reach, RoHS and WEEE Compliant
    Other ECCN: 5A991A
    HTSUS Number: 8517.62.0050
    Perle Limited Lifetime Warranty



    QUICK LINKS

    Help & Contact Us        MOXA
    Delivery & Returns        Ethernet Switch   
    Request a Quote           Media Converter 
    LineCard
    COMPANY INFO

    About Us
    Terms
    Shipping Policy
    Contact Us

    Copyright © 2020 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.