Introduction
The TCF-142-RM series of serial-to-fiber converters are slide-in modules that work with the TRC-190 chassis. The modules convert from the RS-232, RS-422, or RS-485 signal to a fiber optic signal.
Automatic Baudrate Detection
The TCF-142-RM series can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any problem.
• Optical Fiber Side |
Fiber Connector |
SC or ST |
Cable Requirements |
Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm
Multi-mode: 50/125, 62.5/125, or 100/140 μm |
Transmission Distance |
Single-mode: 40 km
Multi-mode: 5 km |
Wavelength |
Single-mode: 1310 nm
Multi-mode: 850 nm |
Tx Output |
Single-mode: > -5 dBm
Multi-mode: > -5 dBm |
Rx Sensitivity |
Single-mode: -25 dBm
Multi-mode: -20 dBm |
Point-to-Point Transmission |
Half-duplex or full-duplex |
Ring Transmission |
Half-duplex |
• RS-232/422/485 Side |
Connector |
DB9 |
RS-232 Signals |
TxD, RxD, GND |
RS-422 Signals |
TxD+, TxD-, RxD+, RxD-, GND |
RS-485-4w Signals |
TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w Signals |
Data+, Data-, GND |
Baudrate |
50 bps to 921.6 kbps |
ESD Protection |
15 kV for all signals |
• Physical Characteristics |
Dimensions |
86.8 x 136.5 x 21 mm (3.42 x 5.37 x 0.83 in) |
• Environmental Limits |
Operating Temperature |
0 to 60°C (32 to 140°F) |
Storage Temperature |
-20 to 75°C (-4 to 167°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
• Power Requirements |
Input Voltage |
12 VDC |
Power Consumption |
150 mA @ 12 V |
• Standards and Certifications |
EMC |
CE, FCC |
EMI |
FCC Part 15 Subpart B Class A |
EMS |
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 2,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 3 |
Freefall |
IEC 60068-2-32 |
Green Product |
RoHS, CRoHS, WEEE |
• MTBF (mean time between failures) |
Time |
514,926 hrs |
Database |
Telcordia (Bellcore), GB |
|