Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
TCF-142-S-ST-RM - RS-232/422/485 to Fiber Optic Converter. ST Single mode. Slide-in Module by MOXA

TCF-142-S-ST-RM - RS-232/422/485 to Fiber Optic Converter. ST Single mode. Slide-in Module
by MOXA

Write a review Write a review
  • Extend RS-232/422/485 transmission up to:
    • 40 km with single-mode
    • 5 km with multi-mode
  • 1K or 150K ohm adjustable pull high/low resistor
  • “Ring” and “Point-to-Point” transmission supported
Mfg SKU # : TCF-142-S-ST-RM
Our Price : $534.73
Stock : Call for Availability
Quantity :

Introduction

The TCF-142-RM series of serial-to-fiber converters are slide-in modules that work with the TRC-190 chassis. The modules convert from the RS-232, RS-422, or RS-485 signal to a fiber optic signal.

 

Automatic Baudrate Detection

The TCF-142-RM series can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any problem.

 Optical Fiber Side
Fiber Connector SC or ST
Cable Requirements Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm
Multi-mode: 50/125, 62.5/125, or 100/140 μm
Transmission Distance Single-mode: 40 km
Multi-mode: 5 km
Wavelength Single-mode: 1310 nm
Multi-mode: 850 nm
Tx Output Single-mode: > -5 dBm
Multi-mode: > -5 dBm
Rx Sensitivity Single-mode: -25 dBm
Multi-mode: -20 dBm
Point-to-Point Transmission Half-duplex or full-duplex
Ring Transmission Half-duplex
 RS-232/422/485 Side
Connector DB9
RS-232 Signals TxD, RxD, GND
RS-422 Signals TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w Signals TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals Data+, Data-, GND
Baudrate 50 bps to 921.6 kbps
ESD Protection 15 kV for all signals
 Physical Characteristics
Dimensions 86.8 x 136.5 x 21 mm (3.42 x 5.37 x 0.83 in)
 Environmental Limits
Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature -20 to 75°C (-4 to 167°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
 Power Requirements
Input Voltage 12 VDC
Power Consumption 150 mA @ 12 V
 Standards and Certifications
EMC CE, FCC
EMI FCC Part 15 Subpart B Class A
EMS EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 2,
EN 61000-4-5 (Surge) Level 2,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 3
Freefall IEC 60068-2-32
Green Product RoHS, CRoHS, WEEE
 MTBF (mean time between failures)
Time 514,926 hrs
Database Telcordia (Bellcore), GB

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.