Specifications |
| ORing Switch Model |
IGS-9042GP-LA-PN |
| Physical Ports |
|
| 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX |
4 |
| 100/1000Base-X SFP Port |
2 |
| Technology |
|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for
1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP
(Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for
VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP
(Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link
Layer Discovery Protocol)
|
| MAC Table |
8K |
| Priority Queues |
8 |
| Processing |
Store-and-Forward |
| Switch Properties |
Switching latency: 7 us
Switching bandwidth: 12Gbps
Max. Number of Available VLANs:
4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate
limiting: User Define
|
| Jumbo frame |
Up to 9.6K Bytes |
| Security Featues |
Device Binding security feature
Enable/disable ports, MAC based port security
Port based
network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius
centralized password management
SNMPv3 encrypted authentication and access security
Https /
SSH enhance network security
|
| Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250
units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN
(802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based
QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring,
security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP client
|
| Network Redundancy |
O-Ring
Open-Ring
O-Chain
*noteMRP
MSTP (RSTP/STP compatible)
|
| PROFINET conformance class |
Conformance-class B |
| RS-232 Serial Console Port |
RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 |
| LED Indicators |
|
| Power Indicator (PWR/1/2) |
Green : Power LED x 3 |
| R.M. indicator (R.M.) |
Green : indicate system operated in O-Ring Master mode |
| Ring indicator (Ring) |
Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the
Ring is broken.
|
| Fault indicator (Fault) |
Amber : Indicate unexpected event occurred |
| 10/100/1000Base-T(X) RJ45 port Indicator |
Green for port Link/Act.
Dual color LED for speed indicator : Green for 1000Mbps / Amber for
100Mbps / Off-light for 10Mbps
|
| 100/1000Base-X SFP port Indicator |
Green for port Link/Act. |
| Fault Contact |
|
| Relay |
Relay output to carry capacity of 1A at 24VDC
|
| Power |
|
| Redundant Input Power |
Dual DC inputs. 12~48VDC on 6-pin terminal block |
| Power Consumption (Typ.) |
8 Watts |
| Overload Current Protection |
Present |
|
Reverse Polarity Protection
|
Present |
| Physical Characteristics |
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
54.3 (W) 108.5 (D) x 145.1 (H)mm |
| Weight (g) |
803 g |
| Environmental |
|
| Storage Temperature |
-40 to 85C (-40 to 185F) |
| Operating Temperature |
-40 to 75C (-40 to 167F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A
|
| EMS |
EN61000-4-2 (ESD)
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6
(CS),
EN61000-4-8,
EN61000-4-11
|
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
