Environmental Product Compliance |
China RoHS |
Environmentally Friendly Use Period = 25; |
General |
Net weight |
0.296 kg |
Efficiency |
typ. 92.8 % (120 V AC) |
|
typ. 93.7 % (230 V AC) |
Insulation voltage input/output |
4 kV AC (type test) |
|
3 kV AC (routine test) |
Protection class |
II |
Degree of protection |
IP20 |
MTBF (IEC 61709, SN 29500) |
> 1272000 h (25 °C) |
|
> 690000 h (40 °C) |
|
> 271000 h (60 °C) |
Assembly instructions |
DIN rail mounting |
Standards and Regulations |
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
Standards/regulations |
EN 61000-4-2 |
Contact discharge |
4 kV (Test Level 2) |
Standards/regulations |
EN 61000-4-3 |
Frequency range |
80 MHz ... 1 GHz |
Test field strength |
10 V/m (Test Level 3) |
Frequency range |
1.4 GHz ... 2 GHz |
Test field strength |
3 V/m (Test Level 2) |
Standards/regulations |
EN 61000-4-4 |
Comments |
Criterion B |
Standards/regulations |
EN 61000-4-6 |
Frequency range |
0.15 MHz ... 80 MHz |
Voltage |
10 V (Test Level 3) |
Conducted noise emission |
EN 55016 EN 61000-6-4 (Class A) |
Standards/regulations |
EN 61000-4-8 |
|
EN 61000-4-11 |
|
EN 61000-4-9 |
|
EN 61000-4-12 |
|
EN 61000-4-18 |
Standard - Safety of transformers |
EN 61558-2-16 |
Standard - Electrical safety |
IEC 61010-2-201 (SELV) |
Standard - power supply devices for low voltage with DC output |
EN 61204-3 |
Standard – Safety extra-low voltage |
IEC 61010-1 (SELV) |
|
IEC 61010-2-201 (PELV) |
Standard - Safe isolation |
IEC 61558-2-16 |
|
IEC 61010-2-201 |
Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
UL approvals |
UL Listed UL 61010-1 |
|
UL Listed UL 61010-2-201 |
|
UL 1310 Class 2 Power Units |
|
ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
< 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6) |
Overvoltage category (EN 61010-1) |
II (≤ 5000 m) |
Overvoltage category (EN 62477-1) |
III (≤ 2000 m) |
Connection data, input |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.14 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.14 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
26 |
Conductor cross section AWG max. |
14 |
Stripping length |
8 mm |
Output data |
Nominal output voltage |
24 V DC |
Setting range of the output voltage (USet) |
24 V DC ... 28 V DC (constant capacity) |
Nominal output current (IN) |
3.8 A |
Dynamic Boost (IDyn.Boost) |
7 A (≤ 60 °C (5 s)) |
Derating |
> 60 °C (2.5%/K) |
Connection in parallel |
Yes, for redundancy and increased capacity |
Connection in series |
yes |
Feedback resistance |
≤ 35 V DC |
Protection against surge voltage on the output |
≤ 32 V DC |
Control deviation |
< 0.5 % (Static load change 10 % ... 90 %) |
|
< 3 % (Dynamic load change 10 % ... 90 %, (10 Hz)) |
|
< 0.2 % (change in input voltage ±10 %) |
Residual ripple |
< 45 mVPP (with nominal values) |
Output power |
90 W |
Typical response time |
500 ms |
Maximum power dissipation in no-load condition |
< 1 W (120 V AC) |
|
< 1 W (230 V AC) |
Power loss nominal load max. |
< 7 W (120 V AC) |
|
< 6 W (230 V AC) |
Connection data for signaling |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.14 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.14 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
26 |
Conductor cross section AWG max. |
14 |
Stripping length |
8 mm |
Dimensions |
|
Width |
45 mm |
Height |
99 mm |
Depth |
90 mm |
Weight per piece |
380.0 GRM |
Input data |
Input voltage range |
100 V AC ... 240 V AC -15 % ... +10 % |
|
110 V DC ... 250 V DC -20 % ... +40 % |
Dielectric strength maximum |
300 V AC 30 s |
Discharge current to PE |
< 0.25 mA (264 V AC, 60 Hz) |
Current consumption |
1 A (100 V AC) |
|
0.83 A (120 V AC) |
|
0.46 A (230 V AC) |
|
0.44 A (240 V AC) |
Nominal power consumption |
104 VA |
Inrush surge current |
typ. 13 A (at 25 °C) |
Mains buffering |
typ. 35 ms (120 V AC) |
|
typ. 35 ms (230 V AC) |
Input fuse |
3.15 A (slow-blow, internal) |
Choice of suitable circuit breakers |
6 A ... 16 A (Characteristic B, C or comparable) |
Type of protection |
Transient surge protection |
Protective circuit/component |
Varistor |
Connection data, onput |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.14 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.14 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
26 |
Conductor cross section AWG max. |
14 |
Stripping length |
8 mm |
Ambient conditions |
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) |
Ambient temperature (start-up type tested) |
-40 °C |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
Climatic class |
3K3 (in acc. with EN 60721) |
Degree of pollution |
2 |
Installation height |
≤ 5000 m (> 2000 m, observe derating) |
Approvals |
|
- cULus Listed
- DNV GL
- EAC
- cUL Listed
- IECEE CB Scheme
- UL Listed
|