Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
RPST12-100-70 - *Discontinued* -  RemotePro - Remote Power System, 70W Solar, 12V 100Ah Battery, Steel Enclosure by Tycon Systems

RPST12-100-70 - *Discontinued* - RemotePro - Remote Power System, 70W Solar, 12V 100Ah Battery, Steel Enclosure
by Tycon Systems

Write a review Write a review
  • Complete Remote Power Solution for Off-Grid operation
  • Weatherproof, UV resistant, outdoor enclosures
  • Enclosures can be Wall or Pole Mounted
  • High Performance Valve Regulated Sealed Lead Acid Batteries
  • Advanced battery charge controller protects against overcharge and over discharge

 

The RPST12-100-70 of RemotePro™ series outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics. The sealed and weatherproof enclosures have extra space available inside for customer electronics.

All enclosures are hinged and gasket sealed. The PL enclosure can accept a padlock or tamper seal. The ST enclosure is equipped with 2 tamper proof closures that are operated by a special key (included).

The RPST12-100-70 can be mounted to a wall or pole with the included mounting bracket system.

The high quality solar panels have a 25year power output guarantee. The 5W and 10W solar panels are mounted directly to the DC enclosure saving space and making a more convenient assembly. The larger solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.

Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Most of the PL and ST systems include a controller with built in POE inserter and DCDC converter to supply up to 48V POE from the 12V battery system. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

Batteries in the DC and PL enclosures are an Advance Glass Matt (AGM) type which have good all temperature performance. The ST enclosure uses a high performance GEL battery which gives the best available deep discharge and temperature performance.

 

RPST12xx-100-70

Rated Power Generation

17W

Reserve Time @ Rated Power

35hrs

POE Output Voltage (DC)

12V1A 18V1.7A

24V1.2A

48V.62A

Secondary Volts Out (DC)

12V 1.5A

Battery Capacity (Amp Hrs)

102Ah

Battery Voltage (DC)

12V

Battery Type

Valve Regulated Sealed Lead Acid GEL

Battery Life

5 Years

Controller Type

Dual Input: Solar/POE, Dual Output: Battery Voltage/POE with DCDC Converter

Overcharge Protection 

14.4V

Over-discharge protection

11.0V

Over-discharge recovery volts

12.0V

Controller Self Consumption

<0.5W

Enclosure Type

Powder Coat Steel

Enclosure External Size

24 x 15 x 14" (610 x 381 x 356mm)

Enclosure Internal Size

23 x 14 x 12" (584 x 356 x 305mm)

Space available for Customer Electronics

12 x 12 x 12" (305 x 305 x 305mm)

Solar Panel Dims

30” X 27”

(762 x 686mm)

Operating Temperature

-30°C to +60°C (-22°F to 140°F)

System Weight 

(no batteries)

84lb (38kg)

Battery Weight

78lb (35kg)

Wind Speed Rating 

110MPH (49m/s)


Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.