|
|
|
TP-SC24-40-MPPT - *Discontinued* - Solar MPPT Battery Charging Controller , Auto Voltage, 12/24V Battery, 40A Solar, 20A Load.
by Tycon Systems
|
|
|
|
- MPPT Temperature Compensated Charging
- Fully Automatic Operation
- LCD Displays: Battery Volts, Battery Temp, Battery Level, Load Current and Solar Current
- Autoranging 12V or 24V Battery Arrays
- Multimode Load Operation – 5 selectable modes
- Soft Start Load Output to Power High Capacitive Loads
- Automatic 30day Battery Equalization
- Conformal Coated Electronics for Environmental Protection
- TVS lightning protection, Industrial Temperature Range
- Low self consumption <1W
| Mfg SKU # : | TP-SC24-40-MPPT |
|
|
|
The Tycon Solar™ TP-SC24-40-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers. The battery temperature probe cable is included. The controllers are auto-ranging to accommodate 12V and 24V battery systems. They are designed to charge Flooded, AGM, GEL or Lithium batteries. They also have a USER setting for customizable battery charge settings. They have an integral LCD display that shows Battery Voltage, Battery Capacity, Charging Capacity, Battery Temperature, Load Current and Solar Current.
There is an RS232 interface to connect to the Tycon #TP-SC-BT1 Bluetooth adapter (not included). Using this configuration and the available Android or IOS mobile app, the solar controller can be monitored and controlled from a distance.
They have multiple load operating modes which can be set through the buttons on the controller.
Rated Battery Voltage |
12/24 (Auto-Detect), 35V Max |
Battery Types Supported |
Lead Acid: AGM, GEL, Flooded
Others: Lithium, Custom |
Rated Solar Current |
40A Max |
Max Solar Panel Size |
12V Battery = 550W
24V Battery = 1100W |
Rated Load Current |
20A Max |
Maximum Capacitive Load |
10,000uF |
Max Solar Input Voltage |
110V (25C) ; 90V (-25C) |
Max Power Point Range |
+2VDC to 75VDC Battery Volts |
Conversion Efficiency |
96% Typ |
MPPT Tracking Efficiency |
>99% |
Communication Port |
RS232 (for TP-SC-BT1 only) |
Self-Consumption |
< 1W |
Temperature Compensation |
-3.0mV/℃/Cell |
Max Wire Size |
8 AWG |
Voltage and Current Accuracy |
+/-2% |
Grounding |
Positive Ground |
Environmental Protection |
IP32 |
Certifications |
CE, RoHS |
Operating Temp |
-35°C to 55°C (-31°F to 131°F) |
Dimensions |
238x173x72.5mm (9.4x6.8x2.9”) |
Weight |
2Kg (4.4lb ) |
|
|
