|
|
|
Tycon Systems TPDIN-POE-RELAY - PoE Powered 10A Relay, 802.3af/at/bt Class 0 or 24V passive PoE, NO & NC Connections, Gigabit da
by TYCON SYSTEMS
|
|
|
|
- PoE Powered, No Other External Power Required
- Accepts 802.3af/at/bt Class 0 PoE or 24V Passive PoE
- Normally Open and Normally Closed 10A Relay Connections
- Gigabit Data Passthru with Surge Protection
- Wide Operating Voltage Range: -40C to +70C
- DIN Rail Mounting
|
|
|
The TPDIN-POE-RELAY is a unique device that provides a way to control up to 10A of current from a managed PoE Switch or other PoE device. When PoE is applied to the TPDIN-POE-RELAY, the relay closes and the LED turns ON. When PoE power is removed, the relay turns off and the LED turns OFF. There are two connections, a normally closed and a normally open, so that both relay logic states can be utilized.
Many modern PoE switches allow an operator to enable or disable the PoE on a particular port. This PoE switch function can be used to control the relay.
The unit features a Gigabit Data Passthrough with surge protection to protect the data connection up to 30KV.
It mounts to a standard DIN Rail commonly used in industrial installations.
Relay Type |
NO & NC 10A 30VDC/250VAC |
Relay Function |
PoE ON- Relay Closed, LED ON PoE OFF – Relay Open, LED OFF |
Data PassThrough |
10/100/1000Mbps |
Data Protection |
Pin to Pin (1-2, 3-6, 4-5, 7-8) Clamp Voltage: 3.3V ESD, IEC61000-4-2: +/- 30KV contact and air EFT, IEC61000-4-4: 40A (5/50us) Lightning, IEC61000-4-5: 15A (8/20us) |
PoE Input Requirements |
802.3af/at/bt Class 0 PoE or 24V Passive PoE |
Self Consumption Power |
<1W |
Connections |
Removable Wire Terminal |
Wire Size |
12AWG |
Mounting |
DIN Rail |
Operating Temperature |
-40C to +70C (-40F to 158F) |
Humidity (RH) |
0% - 90% |
Dimensions (LxWxH) |
125 x 102 x 46mm (4.9” x 4” x 1.8”) |
Weight |
260g (9.2 oz) |
|
|
