1.800.301.9097
COVID-19 Response: a note to our customers. 
We're here to help.Learn More>

Login / Register Contact Us
 
NE-4110S-P - 10/100M Ethernet Network Enabler for RS-232 device, RJ-45,with programmable firmware by MOXA

NE-4110S-P - 10/100M Ethernet Network Enabler for RS-232 device, RJ-45,with programmable firmware
by MOXA

Write a review Write a review
  • 10/100 Mbps Ethernet interface
  • Up to 230.4 kbps baudrate support
  • Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
  • DHCP, BootP, Static IP, and ARP supported
  • SNMP and e-mail alerts for event trapping and notification
  • Half the size of a credit card—only 57 × 40 mm
  • Low power consumption at 1.5W, with single +5V input

 

Mfg SKU # : NE-4110S-P
Our Price : $79.00
Stock :Call for Availability
Quantity :

Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.

 

SNMP and E-mail Alerts for Event Trap and Notification

 NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions:
‧Cold/warm start
‧Password authentication failure
‧Change in DSR/DCD line signal
‧Change in IP address
‧Change in password

 Form Factor
Type Ready-to-go pin header modules
Dimensions 57 × 40 mm (2.24 x 1.57 in)
Weight 40 g
 Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Magnetic Isolation Protection 1.5 kV built-in
Connector RJ45
 Serial Interface
Number of Ports 2
Serial Standards • Port 1:RS-232
• Port 2:TTL console port
RS-485 Data Direction Control ADDC® (automatic data direction control)
 Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate 110 bps to 230.4 kbps
 Serial Signals
TTL • Port 1: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• Port 2: TxD, RxD, GND
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
 Digital I/O Pins
GPIO 4 programmable I/O pins
 Software
Network Protocols ICMP, ARP, IPv4, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP
Configuration Options Web Console, Serial Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x
Operation Modes Real COM, TCP Server, TCP Client, UDP
 Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 60°C (-40 to 140°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude Up to 2000 m
Note Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
 Power Requirements
Input Voltage 5 VDC (±5%)
Power Consumption 290 mA @ 5 VDC max.
 Standards and Certifications
EMC CE, FCC
EMI EN 55022 Class B, FCC Part 15 Subpart B Class A
EMS EN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-8,
EN 61000-4-11
Green Product RoHS, CRoHS, WEEE
 Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures) 290,276 hrs 


Copyright © 2020 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.