NPort IA5150A-T-IEX - 1-port RS-232/422/485 serial device server, 10/100MBaseT(X), 1KV serial surge, IECEx Certification
by MOXA

The NPort IA5150A-T-IEX device servers are designed for connecting industrial automation serial devices, such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. The device servers are solidly built, come in a metal housing and with screw connectors, and provide full surge protection. The NPort IA5000A device servers are extremely user-friendly, making simple and reliable serial-to-Ethernet solutions possible.

Cascading Ethernet Ports Make Wiring Easy

The NPort IA5000A device servers each have two Ethernet ports that can be used as Ethernet switch ports. One port connects directly to the network or server, and the other port can be connected to either another NPort IA device server or another Ethernet device. The dual Ethernet ports help reduce wiring costs by eliminating the need to connect each device to a separate Ethernet switch.

Redundant Power Inputs

The NPort IA5000A Series of device servers have two power inputs that can be connected simultaneously to live DC power sources. If one power source fails, the other source takes over automatically. Redundant power inputs help ensure uninterrupted operation of your device server.

Relay Output Warning and Email Alerts

The built-in relay output can be used to alert administrators when the network is down, when power failure occurs, or when there is a change in the DCD or DSR serial signals. An email warning can also be issued when an abnormality is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations.

Surge Protection for Serial, Ethernet, and Power

Moxa’s leading-edge surge immunity solution, which is applied to the NPort® IA5000A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This advanced surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and resist electrical interference, such as in oil, gas, and power automation applications.

Industrial-grade Certification

To ensure safe and reliable operation in industrial environments, the NPort® IA5000A device servers have obtained various industrial certifications, including an IP30 rating for mechanical protection and UL 508 safety certification for industrial control equipment. In addition, these device servers are UL/cUL listed (for Class 1, Division 2, Groups A,B,C,D), ATEX Class 1 Zone 2, and IECEx compliant for use in hazardous locations.

Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector)

  Supports 2 IP addresses
  Auto MDI/MDI-X connection

• Magnetic Isolation Protection

  1.5 kV (built-in)

Ethernet Software Features

• Configuration Options

  Serial Console, Telnet Console, Web Console (HTTP/HTTPS), Windows Utility

• Management

  ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP

• Filter

  IGMP v1/v2

• Windows Real COM Drivers

  Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

• Linux Real TTY Drivers

  Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x

• Fixed TTY Drivers

  SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

• Android API

  Android 3.1.x and later

• Time Management

  SNTP

Serial Interface

• Connector

  NPort IA5150A Series: DB9 male (RS-232), Terminal Block (RS-422/485)
  NPort IA5250A Series: DB9 male (RS-232/422/485)
  NPort IA5450A Series: DB9 male (RS-232/422/485)

• No. of Ports

  NPort IA5150A Series: 1
  NPort IA5250A Series: 2
  NPort IA5450A Series: 4

• Serial Standards

  RS-232, RS-422, RS-485

• Operation Modes

  Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP

• Baudrate

  Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k

• Data Bits

  5, 6, 7, 8

• Stop Bits

  1, 1.5, 2

• Parity

  None, Even, Odd, Space, Mark

• Flow Control

  None, RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF

• Isolation

  NPort IA5150AI/IA5250AI/IA5450AI Series: 2 kV (I models)

• RS-485 Data Direction Control

  ADDC® (automatic data direction control)

• Pull High/Low Resistor for RS-485

  1 kilo-ohm, 150 kilo-ohms

• Terminator for RS-485

  120 ohms

Serial Signals

• RS-232

  TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

• RS-422

  Tx+, Tx-, Rx+, Rx-, GND

• RS-485-4w

  Tx+, Tx-, Rx+, Rx-, GND

• RS-485-2w

  Data+, Data-, GND

Power Parameters

• Input Current

  NPort IA5150A Series: 220 mA @ 12 VDC
  NPort IA5150AI Series: 225 mA @ 12 VDC
  NPort IA5250A Series: 250 mA @ 12 VDC
  NPort IA5250AI Series: 290 mA @ 12 VDC
  NPort IA5450A Series: 374 mA @ 12 VDC
  NPort IA5450AI Series: 512 mA @ 12 VDC

• Input Voltage

  12 to 48 VDC

• No. of Power Inputs

  2

• Power Connector

  Terminal block

Physical Characteristics

• Housing

  Metal

• Dimensions

  NPort IA5150A/IA5250A Series: 36 x 105 x 140 mm (1.42 x 4.13 x 5.51 in)
  NPort IA5450A Series: 45.8 x 134 x 105 mm (1.8 x 5.28 x 4.13 in)

• Weight

  NPort IA5150A Series: 475 g (1.05 lb)
  NPort IA5250A Series: 485 g (1.07 lb)
  NPort IA5450A Series: 560 g (1.23 lb)

• Installation

  DIN-rail mounting, Wall mounting (with optional kit)

Environmental Limits

• Operating Temperature

  Standard Models: 0 to 60°C (32 to 140°F)
  Wide Temp. Models: -40 to 75°C (-40 to 167°F)

• Storage Temperature (package included)

  -40 to 75°C (-40 to 167°F)

• Ambient Relative Humidity

  5 to 95% (non-condensing)

Standards and Certifications

• EMC

  EN 55032/24

• EMI

  CISPR 32, FCC Part 15B Class A

• EMS

  IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
  IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
  IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
  IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
  IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
  IEC 61000-4-8 PFMF
  IEC 61000-4-11 DIPs

• Hazardous Locations

  NPort IA5100A/IA5200A models: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2
  NPort IA5100A-IEX/IA5200A-IEX models: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2, IECEx
  NPort IA5400A Series: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2, IECEx, UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2

• Safety

  UL 508

• Vibration

  IEC 60068-2-6

• Shock

  IEC 60068-2-27

• Freefall

  IEC 60068-2-32

Declaration

• Green Product

  RoHS, CRoHS, WEEE

MTBF

• Time

  262,805 hrs

• Standards

  Telcordia (Bellcore) Standard TR/SR

NPort IA5150A-T-IEX.pdf

3,596 K